Conversations

Photo of Kar Mah
MSM-A: Changing to watchdog warm reset mode
Please I need the description  for the below log. <Noti:EPM.UnexpctRebootDtect> MSM-A: Booting after System Failure. <Noti:EPM.wd_warm_r...
  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of christopher madison
16.1.1.4 exos on 430x-8p
we recently decided to upgrade to exos 16.1.1.4. we have a variety of devices. x670, x460, x440, and x430-8p. We are using netsight 6.2.0...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of christopher madison
Netsight snmpv2 bad community name on 15.5.2.9 patch1-5
running netsight 6.2. I have a test switch summit 440 with 15.3.1.4 on both partitions. I added it to netsight and did discover. everythi...
  • 1 me too
  • 4 replies
  • Problem
  • Solved
Photo of christopher madison
resets without loss of power
Summit 670 resets when we have a power outage. The device has two power supplies. Both of which are plugged in to separate UPS's.  The lo...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Mary Peng
10gig optic port goes down with remote fault, needs power down and up to get it back once a while
I have an extreme switch recently configured, the optical port is not working very good. The link state is always active for a while(coup...
  • 1 me too
  • 5 replies
  • Problem
  • Solved
Photo of christopher madison
mac in two fdb's
I have a combination of 460/440s in my network. We have a data(computer) vlan and a phone vlan. Create vlan data tag 60 Create vlan ...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of christopher madison
ELRP uplink port question
We are running ELRP on all our ports. including the 10gig ports; that we use for our backbone. on stacks with the 460 48 port switches. W...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of christopher madison
Unconfigure switch question
I have a 460 with a core licence, that i plan to reset to factory settings and re-configure does the command: unconfigure switch ...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of christopher madison
460-48P POE distribution
How is the POE distributed in the 460 or 440 48p switches. i believe that at regular POE power i should get around 23 ports of poe power,...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of christopher madison
10Gig ports going down-local fault
case number 01084747 related our 10gig ports on summit series 440 to 460 will go down losing connectivity. We are seeing this spread ou...
  • 1 me too
  • 3 replies
  • Problem