Conversations

Photo of Danial Jalil
Can flow-redirect be used on layer 2 ? if yes, Syntax please
I want to redirect flows based on port numbers. Is there a way to achieve that?
  • 2 me toos
  • 2 replies
  • Problem
  • Not a Problem
Photo of Danial Jalil
ACL for add-vlan-id
I want to add an ingress ACL to a port that adds a vlan to an untagged traffic. if the traffic is tagged it should add a second vlan. fol...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Danial Jalil
Can Exos 670v be used as Media Converter?
Can Exos 670v be used as Media Converter? If on one port we have a 10G Ethernet SFP stick and on the other port we have a 10G Optical sti...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Danial Jalil
Add Vlan tag to untagged traffic
How to add Vlan Tag to an untagged traffic. I tried using ACL but i dont know the correct format. Can anybody help me with assigning a VL...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Danial Jalil
How to prioritize the traffic of one Vlan over the other, assigned to the same pair of ports.
If there are two ports X and Y in which 2 Vlans are assinged. Port X is 10 G and port Y is 1 G. How to prioritize the traffic of VLAN A o...
  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of Danial Jalil
spanning tree protocol
I have disabled spanning tree everywhere on vlans, interfaces yet when i generate PFC pause frames some spanning tree packets are also ca...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Danial Jalil
In Priority Flow Control, Pause for Priority greater than 3 Pauses everything just like normal ethernet frame control Pause
In Priority Flow Control, Pause for Priority greater than 3 Pauses everything just like normal ethernet frame control Pause. I want that ...
  • 1 me too
  • 13 replies
  • Question
  • Answered
Photo of Danial Jalil
In Priority Flow Control, Pause for Priority greater than 3 Pauses everything just like normal ethernet frame control Pause
In Priority Flow Control, Pause for Priority greater than 3 Pauses everything just like normal ethernet frame control Pause. I want that ...
  • 1 me too
  • 1 reply
  • Problem
  • Not a Problem
Photo of Danial Jalil
IP connectivity
I am trying to connect switch using management port. The ip assigned to management port can be pinged but when i ping the default gateway...
  • 1 me too
  • 10 replies
  • Question
  • Answered
Photo of Danial Jalil
priority 4,5,6
I am sending PFC frames with priorities 0-7. when i send Pause frames for priorites 0-3 only the targeted priority stop. But when i send ...
  • 1 me too
  • 1 reply
  • Question
  • Doesn't Need an Answer
Photo of Danial Jalil
How to replace Priority of Vlan?
I have an untagged Port sending frames with Priority Value 0 to the receiver. I want that Priority value 7 is received. That is when the ...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Danial Jalil
PFC Counter
Can we increase the value of PFC Timer inside the switch?
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Danial Jalil
Can a switch generate PFC Pause?
I want my EXOS 670 switch to generate pause frames when it receives certain traffic or when its buffer is full. currently when i send the...
  • 1 me too
  • 8 replies
  • Question
  • Answered
Photo of Danial Jalil
buffer
How do i find if the buffer is being filled that is are the packets being dropped after the buffer is full or not?
  • 1 me too
  • 3 replies
  • Question
  • Answered