Conversations

Conversations 201 - 220 of 223
Photo of Desmond Gonzales
Trouble Creating port mirror on Extreme Summit x440 Switch
I'm having trouble with the CLI on my switch.  When I try to configure my port mirror I receive the error invalid slot number detected at...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of MUNIR ENG
Copy port configuration to another port?
Configuration Port ? which command can make same configuration Port same another port previously prepared?
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Paul Thornton
Control plane ACL in EXOS
Those on here who know me will know that this is something I bring up around once a year; I thought that this time, I'd put it on here to...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of David Coglianese
NetSight not distinguishing between ports and devices
We have a port elements groups that we created to monitor uplink ports. We use this group for two things.   This group allowed u...
  • 1 me too
  • 3 replies
  • Problem
  • Not a Problem
Photo of Gabriel
Switch authentication with Radius + LDAP
Hello, I'm trying to use Freeradius to authenticate the administrators who log into our Extreme switches (Summit X460 or X670) If the lo...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Leo Bistmans
howto restart snmp service
snmp query fail.  How can I restart the snmpd without having to reboot / upgrade the switch.  Would like not to disrupt the network user...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Andrew S.
ELRP and STP x450e
I have 1 x450e acting as a core switch and 5 more that are trunked to the core; a basic hub and spoke topology. I don't believe there is ...
  • 1 me too
  • 8 replies
  • Question
  • Answered
Photo of Ariez Dres Ahito
extreme x670 1/g sfp port not active
hi guys im new to extreme switches and im having a hard time configuring these switches heres the scenario: we have extreme x670v switc...
  • 1 me too
  • 8 replies
  • Question
  • Answered
Photo of David Coglianese
How can I correct a stack mac address
We have a stack of 1 x460 and 3 x440s running summitX-15.5.3.4-patch1-2.xos   Over the weekend the building they are in lost power and ap...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of MikroTik
How internet services can work in VLANs if there are 4VLANs on X440x Switch.
Greetings! Dear Friends, We created 4 VLANs in X440x switch on which default VLAN1 is getting Internet service while other 3 VLANs are ...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Justsomebodi
Alternative to SNMP for XOS switch uptime for Netsight
Hi All Is there any other way of moitoring switch uptime other than SNMP on Netsight? I am finding that SNMP for some switches is to "s...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of David Coglianese
Why do X670's compress routes
Just converted from BDX8 to duel X670G2-48x-4q site router and we see compressed routes. Everything seems to be working fine, we are just...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Stanley Riley Jr.
x460 empty port blinking amber
I have an x460-48P that someone reported a port that went down.  So I investigated and saw on the switch CLI that the port was enabled an...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of David Coglianese
Is there a way to manage port poe on and Exos switch through NetSight
We have a customer who wants to reset inline-power on an Exos port using NetSight. I was trying to create a column in a FlexView and thou...
  • 1 me too
  • 8 replies
  • Question
  • Answered
Photo of David Coglianese
How to create an expression to average values of 4 rows in a column?
I want to display the overall cpu usage of a server. Is there a way to call out specific instances of a colmn? The processor load colm...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of David Coglianese
Legacy POE and Exos16.1
I was trying to do some testing with legacy PoE and found I could not enable it on my switch running 16.1.1.4. I thought it might have be...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Marlon
Netsight CLI Telnet/SSH automatic Login
is the netsight capable of auto login when we use the telnet or ssh? when we right click the devices and choose telnet or ssh we need to ...
  • 3 me toos
  • 3 replies
  • Question
  • Answered
Photo of Carol Oughton
POE port_fault
Please advise if this is a software bug, but our x440-24p switch produced an error: POE port_fault and cause our access points to fail. ...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Tavares Belmont
ridgeline uplink ports group with alerts
Hello, I have many computers on my network and every day I see that there are many up and down ports logs information b...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Mary Peng
10gig optic port goes down with remote fault, needs power down and up to get it back once a while
I have an extreme switch recently configured, the optical port is not working very good. The link state is always active for a while(coup...
  • 1 me too
  • 5 replies
  • Problem
  • Solved