Conversations

Conversations 121 - 140 of 242
Photo of Ashwini Balachandra
What are my options for routing vlan traffic between two x460 devices which are in different locations?
The two devices have L3 connection using e-BGP(Both x460 have different BGP neighbors). I have tried L3 GRE tunneling and it doesnt work...
  • 1 me too
  • 10 replies
  • Problem
  • Not a Problem
Photo of Dean Ferraro
I am beginning to see this error more and more on my 460G2 switches running 16.1.3.6 does anyone know what this is referencing?
I am only posting this question as I do not see an actual issue so far, but do not want one to creep up and bite me. Thanks
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Frank Veen
High cpu in monitoring because of SnmpSubagent andf SnmpMaster processes
Hi all, Can anybody help explain why the snmpMaster and snmpSubagent processes are using a lot of cpu during snmp polls? Maybe misconfig...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Marius Matijosius
Syslog severity in Netsight
My idea was to create severity alarm based on syslog messages i ECM. But I noticed that all syslog messages are logged and displayed with...
  • 2 me toos
  • 8 replies
  • Question
  • Answered
Photo of David Coglianese
Clients over time in NetSight/Purview
It would be very helpful if we had a report for IP addresses over time. Currently there is a report called "Clients over time" which is...
  • 1 me too
  • 4 replies
  • Idea
Photo of Gabriel Bagita
How to create a report based on vendor specific MIB in OneView
We would like to monitor the status of the FortiGate firewalls. We added them to the NetSight Management, but it reports only the device ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Transporter
Netsight as a status display
Hi Hub I would like to use netsight as a permenantly displayed graphoc on a wall screen and have already set up maps I want displayed.  ...
  • 1 me too
  • 9 replies
  • Question
  • Answered
Photo of Hilario Martin
How to save EXOS config via script
Is there any way to send "y" via scripting/Netsight? * Slot-1 :-) # save configuration primary The configuration file primary.cfg alread...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Frank Veen
Create ACL for specific ELRP vlan
Hello, We have configured a ELRP dedicated vlan and configure this vlan tagged on all ports. We would like to secure this vlan to allow ...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Weda
Risks When Upgrading from EXOS v12.5 to v16.1?
I have installed EXOS ver 16.1.3.6-patch1-9 in the free partition of device which has current firmware 12.5.4.5. I haven't rebooted yet. ...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Weda
some devices return "sh: ./sftp: not found" when firmware upgrade via scp2
We were in a process of updating EXOS switches via Netsight script and we noticed some switches have not been upgraded. These set of swit...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Bill Handler
nac authentication google sign in
Many schools in our area that do not have AD are using Google Domains.  Is there a plan/is it possible to use Google to authenticate user...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Leonardo Peixoto
ExtremeWireless & ExtremeControl Guest Authentication
Greetings guys, I've posted about 1 year ago about NAC Social Media authentication ideas for Guest networks (https://community.extremene...
  • 3 me toos
  • 4 replies
  • Idea
  • Planned
Photo of Ian Worms
WAN-PHY Support
I would like to understand if WAN-PHY is only supported on the Extreme X480 switches or what other Extreme switches?
  • 1 me too
  • 2 replies
  • Question
  • Doesn't Need an Answer
Photo of Silva
How to Configure Netsight Dashboard ?
Hello guys ! I just recently started with netsight , and i have seen some very com display with graphics , dashboards , showing features...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of David Coglianese
Can't telnet to a slot in a stack with radius enabled
We have a network that consists of stacks for X460s and X440s. This district has several admins, so in an affort to provide accountabilit...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of David Coglianese
Why is the default for iparp max entries 8192?
It seems that user traffic would be negatively affected if entries are not stored because the configured max is too low. We recently beg...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of John Moore
DHCP snooping log message
Hi Experts, I have an extreme switch running v15.1, there is an log message printed out, may I know what does the message mean? 10/23/2...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Germán Persello
What are the ARP and MAC table limits on x440 and x460G2?
Hello everyone, I'd like to know the ARP and MAC table limits on both the x440 and x460G2, and I wanted to know if there's a per-VLAN l...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Larry Kunz
Idea: Moving software configuration instructions to the web
I write the documentation (installation guides and quick reference guides, or QRGs) for Extreme hardware platforms. I'd like to know how...
  • 1 me too
  • 3 replies
  • Idea