Conversations

Photo of GCIT_Support
OneView XOS restore
Is it possible to restore XOS config  from OneView.  I have several x460s comm via SNMPv3. They seem to backup fine thru the scheduled ar...
  • 1 me too
  • 8 replies
  • Question
  • Answered
Photo of Justsomebodi
SNMP contact lost after upgrade
We have upgraded a number of X460 stacks from release 15.3.1.4 to 16.1.1. I now have a single switch that has no SNMP contact. I am aware...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of Rod Robertson
Is Fibre Channel Over Ethernet supported on extreme Summit Switches , if it is how is it configured.
I am looking to confirm that extreme hardware ( Summit Xseries )support FCoE. If so what is it called in "Extreme speak " and how specifi...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Jim Herold
Summit Stack bcmDPC high cpu utilization
I have a stack of Summit 450 and 460 switches.  All are running XOS 12.6.2.10 (I know it's old, but we don't pay support so can't upgrade...
  • 1 me too
  • 5 replies
  • Problem
  • Solved
Photo of Alexandr P
Slot-2 FAILED (1) Dual Master
Hello! I have 2 switches X460 in stack. Slot 1 - priority 90 Slot 2 - priority 70 Soft 15.5.2.9 p1-5 After reboot slot 1, slot 2 became...
  • 1 me too
  • 6 replies
  • Problem
  • Solved
Photo of Alexandr P
Flapping alternate stack-ports
Hello! Here is many conversations about this issue. But no answer about resolved in EXOS after 15.4 We have X460 in SummitStack-V. Main ...
  • 1 me too
  • 1 reply
  • Question