Conversations

Photo of Andre Brits Kannemeyer
ExtremeWireless Auto Channel selection
Hi Community So I have a question for the community and would like to get your comments on the topic. I have been deploying the solution...
  • 2 me toos
  • 8 replies
  • Question
  • Answered
Photo of Frank Veen
Query Exos switch for elrp blocked ports / alerts with SNMP
Hi, We would like to query our Exos switches with SNMP for ELRP alerts/blocked ports etc. Anyone know if this is possible (without using...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Frank Veen
Direct SNMP monitoring of Access points (3805i) possible?
Hello, We use Zabbix as our central monitoring system. Currently we are monitoring our access points by contacting the controller with S...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Frank Veen
Wireless Statistics received errors very high on a/n/ac radio's
Hello We have a V2110 controller with 12 AP's. Most AP's are 3715i's but also 3 3805i's. When I look at the Wireless statistics report I...
  • 1 me too
  • 2 replies
  • Problem
  • Solved
Photo of Frank Veen
High cpu in monitoring because of SnmpSubagent andf SnmpMaster processes
Hi all, Can anybody help explain why the snmpMaster and snmpSubagent processes are using a lot of cpu during snmp polls? Maybe misconfig...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Frank Veen
Create ACL for specific ELRP vlan
Hello, We have configured a ELRP dedicated vlan and configure this vlan tagged on all ports. We would like to secure this vlan to allow ...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Frank Veen
X440 Bootrom not responding to spacebar
Hello, We are trying to reset the admin password of our X440 Exos switch. The switch is not responding to the spacebar to enter bootrom....
  • 1 me too
  • 3 replies
  • Problem
  • Solved
Photo of Ron Oley
Wireless clients sporadically getting Limited Connectivity, APs dropping packets
We have a pair of V2110 wireless controllers and around 400 3825i access points.  Controller firmware is  09.21.06.0002.  AP firmware is ...
  • 9 me toos
  • 55 replies
  • Problem
  • Solved
Photo of Adam
Topology change every 1h
Hello together, we have a big problem on our network, topology change takes place every hour and in the morning sometimes every 3 minutes...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Sai Prasad Rao Rapolu
Default idle timeout (for clients) of pre: 5 min , Post: 30 min and session: 0 min is suited for open wifi
Are default client Timeout periods of 5,30,0 suitable for open wifi ? Because for open wifi there is no post timeout as user is not au...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of M.Nees
client roaming to prefered radio caused radius authentication event which failed
Currently i have a very strange problem. We use EAP-TLS 802.1x Authentication for a internal SSID for notebooks. EWC is installed at the...
  • 1 me too
  • 15 replies
  • Question
  • Answered
Photo of Frank Veen
NAC push policies from X460G2 to older x440(g1)
Hi, We have got two X460G2 switches as a core stack and a couple of (older g1) X440 stacks on the access layer. This X440 switches don't...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Frank Veen
V2110 sending DHCP inform packets
Hello, We have got a V2110 configured as cloud controller. It is fully functional with some 30 ap's connected to it. It has one (outside...
  • 1 me too
  • 2 replies
  • Problem
  • Solved
Photo of Andre Brits Kannemeyer
Apple Authentication with NAC and Policy
We have deployed a V2110 controller with NAC at a client. When users connect to the client's SSID they are placed in a Unregistered Vlan...
  • 3 me toos
  • 2 replies
  • Question
  • Answered
Photo of Frank Veen
EXOS edge port status logging
Hello, In EXOS, is there any way to disable the logging of port up/down events on edge ports? Kind regards, Frank
  • 1 me too
  • 2 replies
  • Question
  • Answered