Conversations

Photo of Mike Assel
igmp snooping & vlan routing Extreme 220
The admin guide for the Extreme 220 says "If an interface has IGMP Snooping enabled and you enable this interface for routing or enlist i...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Biggtimber
Routing the Management address over an LACP lag
I am banging my head against the table trying to get my management IP routing across a LACP lag from my 220  a Dell F10 switch.  In my ea...
  • 2 me toos
  • 1 reply
  • Problem
  • Solved
Photo of Robert Fredette
Disabling STP on a pair of 7100 switches
For many reasons we need to shut down the Spanning Tree on our pair of 7100 switches while we perform some other work on them and the con...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Nachiket Pathak
Is there any way for fast convergence in S-Series switches to prevent topology change impact on routed vlans
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Michael Rosolski
SecureStack B5 resets every 2 weeks
The switch restarts every 2 weeks for no apparent reason. Unfortunately, I can not find any abnormalities in the logs. Do you have an...
  • 2 me toos
  • 2 replies
  • Problem
  • Solved
Photo of Chris Dagney
max port mirrors
what is the max port mirrors on ExtremeSwitching 200 and is there a comparison to a X440? 
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Michel Braga Guimaraes
Is there somehow to block mac address based on acl or other method on Enterasys S8?
I'm trying to block a certain mac address on my switch core (Enterasys S8) but until now I've no success. I tried to use the "BlackHole"...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Chris
Enterasys C5G124 SFP Modules in a stack - "unsupported pluggable module"
So this might be a similar issue to https://community.extremenetworks.com/extreme/topics/c5_b5_f_w_6_71_03_0025_issuing_unsupported_plug....
  • 1 me too
  • 1 reply
  • Problem