Conversations

Conversations 1 - 20 of 26
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
EXOS & Ansible
Hi, I am wondering if anyone has been able to setup Ansible for EXOS switches. If so, can you provide a sample ansible-playbook configura...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
LAG Counters OID
Hi, I am wondering if there is any OID to retrieve LAG counters, such as errors and traffic, as would do for Portchannels on cisco hardwa...
  • GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS, 4 months ago

  • 1 me too
  • 0 replies
  • Question
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
Delete SSL certificate
Hi, I am wondering how can i delete an ssl certificate that was generated on a EXOS switch with the command: "configure ssl certificate ...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Greg Hartze
Show which vlans are tagged / untagged on a single port
When using the "show port <uplink-port> info detail" command, it will provide a list of all vlans assigned to a specific port.  On an upl...
  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
Default interface configuration
Hello, Does anyone know if Exos has a command to remove all configuration from a given interface like Cisco has the "default interface" ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
Run script after successful login
Hi, How can i configure an EXOS switch to run a .xsf script for all users after each successful login. Regards Gonçalo Reis
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
IpArp not learning IP
Hi, i am trying to troubleshoot why IPARP is not showing the IP addresses of edge devices. Slot-1 SEDUCA050100.3 # sh iparp stats ports ...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
Packet capture EXOS 22.3.1.4
Hi, I am trying to do a capture on a switchport i have used different commands, but it looks like they only capture internal traffic. Th...
  • 2 me toos
  • 1 reply
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
Unable to telnet to Slot on a Stack
Hi all, On my access layer switches, which are configured in stacking mode with versions 22.3.1.4 and 21.1.3.7, i am unable to telnet in...
  • GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS, 6 months ago

  • Last reply: Bin, 6 months ago
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
OneView interface utilization widget not showing any information
Hi, I have configured OneView to show interface statistics according to this GTACK https://gtacknowledge.extremenetworks.com/articles/How...
  • 1 me too
  • 1 reply
  • Problem
  • Solved
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
Edge port topology change
Hi, sometimes i get confused probably because i am missing something very obvious but im unable to see it. For some reason a port config...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
EXOS 22.3.1.4 not responding to OID (extremeStackMemberTable)
Hi all, I used to have all my access switch on 21.1.3.7 and used this OID (1.3.6.1.4.1.1916.1.33.2) to get stacking information. After up...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of David
Replace a complete switch stack
Hey guys, it looks like we are having an issue with a stack that has 5 nodes. At some point or another a node will fail so it came to be ...
  • 1 me too
  • 9 replies
  • Question
  • Answered
Photo of Lutha
Port channel between x440g2 48 p and cisco cat 6500
i have configured port channel on my cisco and extreme switch but when i connect the interfaces the port channel doesnt come up not sure ...
  • 1 me too
  • 8 replies
  • Problem
  • Not a Problem
Photo of Alok Shukla
For connecting multimode fiber how do we check Rx or Tx are properly working without breaking?
For connecting multimode fiber there is some functionality  available in cisco like UDLD and loopguard, what about on extreme switches?
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
Wireless C5210 not responding to SNMP queries
Hi all, Both of my controllers have the same configuration for snmp and static routes, suddenly one has stop responding to snmp queries ...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
CPU Congestion
Hi all, From time to time and randomly on my network some stacked switches become unresponsive and very sluggish, my monitoring software...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
SNMP OID to get the Switch Model
Hi all, I am trying to query a switch via snmp to get its model, by model i mean to know if a switch is a X450G2-48p-10G4 or X450G2-48p...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
Memory process with high CPU
Hi, i have found that the ./policy process is using to much CPU and i am unable to stop it.   PID  PPID USER     STAT   RSS %MEM CPU %CP...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
Configure remote wlan services
Hello, in my company I have 4 controllers in pairs of two in same mobility domain. One pair is the c5210 and will be upgraded to v.10...
  • 2 me toos
  • 4 replies
  • Question
  • Answered