Conversations

Conversations 1 - 20 of 292
Photo of kang zhao
Does X770 support IPv6 port mirroring
Hi There, I have enabled port mirroring in X770 but can not find IPV6 packages. We user port, enable both direction My question is , d...
  • 1 me too
  • 1 reply
  • Question
Photo of aloeffle
Run Script on Discovery during ZTP+ process
Dear all. I have a question about running a script during ZTP+ process. NetSight 8.0.4.54 EXOS 22.3.1.4 Patch 4 We want to deploy ZTP+...
  • 2 me toos
  • 4 replies
  • Question
  • Answered
Photo of Ronald Dvorak
AP3915i mounting option
Why is the logo upside down if mounted on the wall with the default option. Marketing 101 = brand recognition
  • 2 me toos
  • 6 replies
  • Question
  • Answered
Photo of SH
Run XMC scripts without selecting a device
Hello, in my opinion in older XMC versions (prior 8.1.3.65) there was the ability to run a script without selecting a device. But in ver...
  • 1 me too
  • 1 reply
  • Question
Photo of Chris Chance
MLAG vs Stack what am i missing
Can't seem to wrap my head around the reason for using MLAG vs Stacking, I'm planning to use 2 x670's as a 10gigabit aggregation hub for ...
  • 1 me too
  • 20 replies
  • Question
  • Answered
Photo of nola saint
Adding an existing untagged member port of vlan Default as tagged can cause STP configuration loss.
New to Extreme switches, and using EXOS version 22. Why do I see this message when adding the same port tag and untagged. Adding an exi...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Sachith A.
how to take configuration backup
how to take configuration backup using GUI
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Yves Haslimann
Sending flow data from a switch direct to ExtremeAnalytics (without a flowcollector engine)
Hello everybody I would like to configure the Extreme Switches (x440-G2, with version 22.4) to sending sflow/netflow data direct to the ...
  • 2 me toos
  • 16 replies
  • Question
  • Answered
Photo of Andreas Larsen
Ansible for XOS
Have anyone done any playbook work with ansible for Extreme networks ? Is there anything done in the ansible-galaxy part or anything done...
  • 4 me toos
  • 16 replies
  • Question
  • Answered
Photo of Martin Flammia
ZTP+ Switch not showing up in EMC
Hi, In the process of configuring ZTP+.  The switch has been set to 'unconfigure switch all' and seems to be obtaining an IP address. ...
  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of Martin Flammia
VRRP best practices, preempt, tracking, fabric routing, accept-mode, host mobility
Hi There, Apologies for this question being a little long.... Just looking into the communities thoughts around some best practices aro...
  • 3 me toos
  • 5 replies
  • Question
  • Answered
Photo of Richard Applebee
Policy Manager v8.1.3.65 enforce
Does not seem to be working? Can anyone else confirm/deny this?
  • 1 me too
  • 1 reply
  • Question
  • Doesn't Need an Answer
Photo of Andre Brits Kannemeyer
XOS Fabric Attached
Hi Community I recently started playing with the Extreme Fabric Connect (Old Avaya Fabric) and some Fabric Attached XOS switches and 39x...
  • 1 me too
  • 14 replies
  • Question
  • Answered
Photo of kjstech
Brocade Ti24x default-gateway will not work if set to VRRP address on EXOS core
Hello, We have two X690 core switches in our network doing layer 3, and they run VRRP between them.  The VRRP address is the default gate...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Chad
MLT on Exos to work with Avaya MLT/SMLT
Hello All, How do I setup LACP/LAG on EXOS G450G2 to work with SMLT on Avaya VSP/Switches? I know LACP, but I thought that MLT/SMLT is ...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Carter Haid
Getting Mac Addresses for Individual Nodes in a Stack - Python Script
Working on a python script to automate the commands I use to program some switches. I am trying to come up with a way to determine the MA...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Joseph Wood
Issues with VOSS 7.0 in GNS3
Does anyone have a set of release notes for the virtual VOSS 7.0 image on Github that details exactly what features are / are not support...
  • 2 me toos
  • 3 replies
  • Question
  • Answered
Photo of Chris Forbes
command to find all active ports & their state
I am looking for a way to find all the active ports and their states on a couple stacks.  Does anyone know of a command I can run to get ...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of brian osgoiod
Extreme equivalent of trunking
I am having difficulty understanding how multiple vlans are transported between extreme switches (not stacked) and how they are physicall...
  • 1 me too
  • 9 replies
  • Question
  • Answered
Photo of Andre Brits Kannemeyer
S Series VXLAN Best Practice
Hi Community We are in the process of configuring VXLAN's between three DC's. All three DC's utilizes S8 core switches (S180 Blades) Ess...
  • 1 me too
  • 2 replies
  • Question
  • Answered