Conversations

Photo of HarrySo
serious issue after enabling udp policy
Hi guys, we need some help! We have serious problems with our X690-G2 switches after enabling a udp policy. In the last weeks we had bro...
  • 1 me too
  • 3 replies
  • Problem
  • Solved
Photo of Chacko
X670-G2 with EXOS 21.1.2.14: Establishing SSH session takes too long
Establishing a SSH connection with Summit X670-G2, EXOS 21.1.2.14 takes too long. You have to wait 15-17 seconds, before the prompt is sh...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of HarrySo
Is there a possibility to see the inactivity duration from a Switch Port in Netsight for XOS Switches
In Ridgline we had an report called inacitive ports or similar. Does this feature exists in Netsight to?
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Network Engineering Team
Upgrading to 16.x.x.x version?
Good day all! We're looking to upgrade several of our X430 and X440 Summits from 15.3.1.4 to one of the lastest 16.x.x.x versions. Any go...
  • 1 me too
  • 12 replies
  • Question
  • Answered
Photo of HarrySo
Summit X450-48t suddenly reboots with Crit:Kern:Alert
In the last days i had a Problem with a suddenly reboot of one X450-48t Switch.Is this a Problem with the Firmware? The Switch was runnin...
  • 1 me too
  • 5 replies
  • Problem
  • Solved
Photo of Mauran
autonegotiation problem on X440-48t-10G
autonegotiation problem on X440-48t-10G hi, my problem is the tuning speed and mode on ports for old pc , this client works fine on old ...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of HarrySo
MLAG two tier design, lacp config for win 2013 servers
We are now testing following MLAG two Tier Design2 BD8810 connected together with two 10Gbit LACP LAG2 X670 connected to the BD's with 2x...
  • 1 me too
  • 11 replies
  • Question
  • Answered
Photo of HarrySo
LACP Counters, big difference between RX-Ok
we have several LACP Lag's configured on our X670 Switches. In the Output of the command #Show lacp Counters i found something interestin...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of HarrySo
Netsight Console discovers only one device in one IP Range Vers. 6.2.0.211
Hi Experts!From one day to another i've got a Problem with discovering devices with Netsight console. The discover finds in different IP-...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of HarrySo
BD 8810 does not recognize Extreme XFP
Hi Experts!We have two BD8810 with 10G8Xc modules installed. Now we have the Problem, that some of the inserted XFPs are not recognized. ...
  • 1 me too
  • 10 replies
  • Question
  • Answered