Conversations

Conversations 1 - 20 of 26
Photo of PARI ELANSURIYAN
New MSM -A Replacement
First MSM-A slot is down and MSM-B is working as master,When new RMA MSM-A slot inserted in to the switch both Backup MSM-B gets down and...
  • 2 me toos
  • 3 replies
  • Question
  • In Progress
Photo of Andre Brits Kannemeyer
BDF between Summit Edge switch and S Series Core
Hi community I am connecting a x440-g2 two to S-Series VSF bonded chassis. The x440 will be configured with two static routes and run ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Harkanwaljeet Singh
bfd missed-hellos
Hello community, We have 2 bfd sessions for OSPF and can see the missed-hellos counter is incremented and resulting in bfd and ofpf to go...
  • 1 me too
  • 1 reply
  • Problem
  • Solved
Photo of Harkanwaljeet Singh
what is snmp trap mode enhance?
Hi Community, I have 18 snmp traps configured on Extreme x460-48t (15.3.1.4) but the switch is sending only 15 traps. e.g. I made one por...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Harkanwaljeet Singh
Are Extreme EXOS compatible with Cisco IP SLA?
Please suggest if Extreme EXOS (15.x and above) is compatible with Cisco IP SLA and what will be the configuration changes required on Ex...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Tom Taylor
Extreme and HP Spanning tree config
We're a majority Extreme shop but have a few HP switches in the mix. I was wondering if anyone could point me in the right direction for ...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Harkanwaljeet Singh
RAM and in-built storage (Internal HDD, CF etc) and external CF?
Hi, The title is self explanatory. I need commands to check the internal storage (hard disk, internal compact flash etc) and external com...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Nobel
When will EXOS 16.2 be released?
Does anyone know when XOS 16.2.1 will be released? Note: This conversation was created from a reply on: Leap Second bug.
  • 2 me toos
  • 10 replies
  • Question
  • Answered
Photo of Harkanwaljeet Singh
conf vrrp vlan VLAN-Name add backup vrid
Surprisingly I could not find any explanation anywhere in Extreme documentation about the below configuration line; conf vrrp vlan VLAN-N...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Raj Kam
what is the meaning of the flag UHLWb & 10.x.x.x ff:ff:ff:ff:ff:ff UHLWb 1 20 igb0
what is the meaning of the flag  UHLWb in Netstat -nr 10.x.x.x ff:ff:ff:ff:ff:ff  UHLWb       1       20   igb0 ff:ff:ff:ff:ff:ff is ...
  • 1 me too
  • 2 replies
  • Problem
  • Solved
Photo of Harkanwaljeet Singh
Problem/Query: show management : what are Drops in snmp stats?
What exactly are the Drops shown for snmp stats in the output of show management ? I have observed that Drops count is increasing in the...
  • 1 me too
  • 3 replies
  • Problem
  • Solved
Photo of Ronny Engelhardt
How to view mac table?
Hi, how i can i view the full mac adresstable. (CISCO equivalent show mac-adresstable) I tried show mac. But i cant believe that this is...
  • 1 me too
  • 11 replies
  • Question
  • Answered
Photo of Harkanwaljeet Singh
PD4-1637995050
What is this PD? Somebody told me that some multicast related errors issues have been addressed via PD PD4-1637995050 and in which EXOS r...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of eyeV
SNMP accees after 15.5.4.2-patch1.5 upgrade
Hi everybody! I've just upgraded XOS on my x480 switches to 15.5.4.2-patch1.5. After reboot I've noticed difference in config between ol...
  • 1 me too
  • 2 replies
  • Problem
  • Solved
Photo of Harkanwaljeet Singh
source specific ssh from EXOS-15.3.1.4
Hi All, Is it possible to give source while doing ssh from Extreme switch to some external node. Like we give source using from in  tra...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Harkanwaljeet Singh
BUG: soft lockup - CPU#1 stuck
One X460G2-48t-10G4 switch with 15.6.1.4 took reboot due to below errors: 10/07/2015 05:39:01.88 <Warn:EPM.UnexpctRebootDtect> Booting a...
  • 1 me too
  • 4 replies
  • Problem
  • Solved
Photo of Harkanwaljeet Singh
CardExec (state BOOTING) timed out: BD8806_EXOS 15.5.4.2patch1-4
We upgraded BD 8806 switch to 15.5.4.2patch1-4 and one of the G48Tc cards in the switch failed to attain operational state after we gave ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Harkanwaljeet Singh
"ssh_exchange_identification: Connection closed by remote host"
ssh_exchange_identification: Connection closed by remote host is coming while trying ssh to BD-8806 running on 15.3.1.4. Login through c...
  • 1 me too
  • 3 replies
  • Problem
  • Solved
Photo of Harkanwaljeet Singh
Query on command "Configure sharing adress-based" - Summit400-48t
Hi all, I have couple of Summit400-48t connected to each other on two links and ports sharing is enabled (mac-source-dest is running at ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Paul
Port Load sharing
After i enable Lacp .. port is not sharing. Utilization is high on Link 1 only. I want to use load balance on both links. Please kindly...
  • 1 me too
  • 12 replies
  • Problem
  • Solved