Conversations

Conversations 1 - 20 of 489
Photo of Joel Garcia
Deploying a WS-AP3935i-ROW
I'm implementing a WS-AP3935i-ROW, and I realize it's a Linux OS, I'd like a help with the initial configuration.I would also like to kno...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Andrew Webster
Are WiNG products affected by BLE (Bleedingbit)?
Hi, Are the WiNG products that integrate a BLE radio affected by the recently announced BLE Bleedingbit issue? CVE-2018-16986CVE-2018-7080
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Craig Sakach
DHCP Failover
We have a C25 controller on which the primary topology is setup in B@AP mode. We also have 2 - Windows 2012 R2 Domain Controllers with DH...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Ryan Corcoran
x620 SFP+ link not coming back up
I have a weird issue that i was wondering if anyone had seen before.  I will preface this by saying i am new to the extreme world.  We ha...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Jeremy Gilbrech
3805 Ethernet Speed
The data sheet for the 3805 access point shows that the ethernet port supports up to 1000 Mbps but on our c5210 I only see options to con...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Johan Hendrikx
Where can I find the release notes of V2110-10.41.10.0014
Where can I find the release notes of V2110-10.41.10.0014 ?I looked athttps://www.extremenetworks.com/support/release-notes/But couldn't ...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Dwayne Watson
C-25 Errors.
Getting message "Message: Config Manager : Config Manager has experienced an error which has prevented it from properly processing a requ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Leonardo Peixoto
Deployment of V2110 on VMWARE ESXi problem: Vlans
We are working on a deployment of 2 new V2110 controllers on customer's ESXi 5 infrastructure, but even configuring with an old guide fro...
  • 2 me toos
  • 5 replies
  • Problem
  • Solved
Photo of Ronald Dvorak
ECA - how to add a switch
How could I tell my 220 switch to connect to my ECA. I'm running latest software so that is OK but I can't find how I'd tell the switch ...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of James A
G3 firmware 06.61.18 download
Is it possible to download G3 firmware from the new portal? I can see the release notes, but not the actual software.
  • 4 me toos
  • 1 reply
  • Question
  • Answered
Photo of Randy Brinson
Does anyone know why my Nintendo 2ds keeps displaying message (enable wireless communication on the device) tried to connect to AP 3935i,
Does anyone know why my Nintendo 2ds keeps displaying a message (enable wireless communication on the device) tried to connect to extreme...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Fabian Padilla
PC users cannot connect to AP Extreme Netwoks
Good afternoon:PC users cannot connect to AP Extreme Netwoks, but cellular user can connect it to the APs and use the cautive portal.Best...
  • 1 me too
  • 2 replies
  • Problem
  • Not a Problem
Photo of Ilya Semenov
IdentiFy: 2,4Ghz cllients unable to get IP
Hello, team, I have V2110 installation and 120 3825APs. Surprisingly, 2,4Ghz clients have stopped working. They unable to get IP. 5Ghz w...
  • 2 me toos
  • 7 replies
  • Problem
  • Solved
Photo of Johan Hendrikx
How can I see the dhcp bindings
How can i display the bindings of a DHCP environment that is configured in a topology that is used in a Wlan configuration within a V2110
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Ronald Dvorak
v10.41.08 - dashboard health counter not readable
After upgrading to v10.41.08 the Health counters on the dashboard are not within the screen because the description was changed from "Low...
  • 1 me too
  • 6 replies
  • Problem
  • Solved
Photo of Jeff Wilcenski
I have an WS-AP3805i with flashing green leds
I have an WS-AP3805i that had been working but now the radio leds and power led are alternating flashing green. So the radio leds flash ...
  • 2 me toos
  • 6 replies
  • Question
  • Answered
Photo of Dennis
How to determine if AP is operating in 4x4:4
- 3935i-ROW on FW 10.41.06.0013- patched to HP J9148A 2910al-48G-PoE+ SwitchAP Inventory report shows LAN1 using AF and not AT. Switch is...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Niyas
what are the procedures to get an extreme certificates
Hi, I am planning to do extreme switching and routing certificate, what are the procedures to get an extreme certificate.
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Volker Kull
new website: missing info and links to nowhere
Since the current change of the extreme networks website we miss a lot of information and most of the links on knowledge base articles en...
  • 2 me toos
  • 3 replies
  • Problem
  • Solved
Photo of Peter
ZTP+ good feature but unusable in real
I'm currently running XMC / Netsight 8.1.2.59 or newer and like to use ZTP+ I like this feature, because I only need to connect switches ...
  • 3 me toos
  • 7 replies
  • Question
  • Answered