Conversations

Conversations 1 - 20 of 169
Photo of Monica Reyes Castellanos
How enable PoE at specifics ports by cli or gui on 220 switches?
I tried to enable ports by cli with this command: confi(if)#poe-shutdown but the problem is that it didn't recognize me, so I look up ...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of SPK ICT
Extreme 220-Series random rebooting
Extreme 220-Series 48GE PoE+ switch is doing random reboots. Before the switch reboots console reads: [SimAddrConflict]: sim.c(4648) 399...
  • 1 me too
  • 6 replies
  • Problem
  • Not a Problem
Photo of Singh
Not able to eanble auto negotiation on 1G uplink ports or 1G SFP port of Extreme 210 switch
Hello Guys,I am not able to enable auto negotiation on up link ports (SFP Ports) of Extreme 200 series switch. Auto negotiation is by def...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of ASW IT Helpdesk
Configure 200 Series to Support Cisco CDP Phone POE+ VLAN ID
I need to know how to configure the 200 series switches to automatically put Cisco phones, that are older and don't support LLDP, into th...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Johan Brand
SSH stops working on 220 series switches
We have about 30 x 220 series switches installed at our sites. After +- a week SSH access to the switches stops working completely. We ha...
  • 1 me too
  • 7 replies
  • Problem
  • Solved
Photo of Miguel Martinez
How i can check port congestion or buffer on Enterasys Secure Stack
I have a few issues lately with pause frames on my uplinks and im trying to discover where they come from and why? also if the ports inde...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Cris Collins
SFP module inventory
Is there a way to list installed SFP module model numbers from the CLI in EXOS 16.1.3.6 on a X670V-48x?
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Mario Salhab
802.1x failing but radius authentication succeeded
Hello, I'm testing 802.1x authentication on extreme XOS. I'm running XOS 16.2.4.5 patch1-5 on x440-8t switch. I've completed the setup b...
  • 2 me toos
  • 8 replies
  • Problem
  • Solved
Photo of ar
Spanguard blocked port is not shown on G3G124-24P with FW 06.61.18.0001
Hi, we use more than 25 G3G124-24P switches as edge devices and every system is configured with a complex configuration (MAC- and 802.1X ...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Jary Santos
c3g
c3g124-48 not booting after attempted firmware upgrade. After rebooting it only gets as far as on the serial connection  ---------------...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of JP Pieterse
Problem with adding secondry vlan interface on extreme C5G124-24P2 - Could not set the interface network.
Hi all, I am trying to set a secondary interface IP on VLAN 1. Due to business changes I needs to move away from their Class C network t...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Alok Shukla
DHCP clients get IP without configuring DHCP relay on switch
In our network environment, we are using x620 and x440 and all users getting IP without configuring DHCP relay agent on the switch. how i...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of gaurav
Hi can anyone please tell me how to disable and then enable back ntp again on Created by ExtremeXOS version 21.1.3.7 switch?
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Andre Brits Kannemeyer
Legacy Securestack B2G switches hang management
Hi Community I thought I will ask the question here as the problem switches that I have is very old. A client of ours have a few hundred...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Marc Stakey
FOG/Microsoft DHCP Server PXE issue
We've been using a FOG server and Microsoft DHCP server to hand out DHCP addresses and pxe boot for imaging purposes.  This has worked fl...
  • 1 me too
  • 1 reply
  • Problem
  • Not a Problem
Photo of Claudio Minnetti
Radius Server configuration on B3 Series Switches
Dear all, I configured a B3 Enterasys switch (with the latest firmware on it B3-661100008) for MAC authentication purpose via a RADIUS...
  • 2 me toos
  • 4 replies
  • Problem
  • Solved
Photo of Carsten Buchenau
Meaning of ARP operation code 3072
On an S-Series chassis we receive the following log messages: RtrArpProc[1]Received ARP packet with Operation code: 3072 All I can find...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Daniele Di Mattia
Firmware and manual downloads for old Enterasys switches ( C3G124-24 - 1H582-51 - VH-2402S2 - N7 )
Hello All,I'm looking for docs and firmware for some old Enterasys switch.C3G124-24 - 1H582-51 - VH-2402S2 - Matrix N7 Can someone give m...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Frank
"rate-limit egress" logging - can it be done?
I'm (successfully) limiting egress rates on select ports of my 460s via "config port 29 rate-limit egress 5000 Kbps" (set low for test pu...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Vedran Jurak
AP7622 - Declaration of Conformity for EU
Hi, where could we obtain this document? We found the docs for older models at the Zebra website but not for this one. Thanks. Best reg...
  • 1 me too
  • 4 replies
  • Question
  • Answered