Conversations

Conversations 1 - 20 of 175
Photo of welisson
IPTV multicast dropping packets
Hi guys,I have been working with IPTV for one year, so, all switch involved in this topology are x460, in this network I have mpls and vr...
  • 2 me toos
  • 9 replies
  • Question
Photo of Resolut1on
TTL expired in transit!
Hi Friends,  Good day.  I have problem with Inter-Vlan. Our goal is PC1 must communicate to PC2 with different VLANs. same as PC2 to P...
  • 1 me too
  • 6 replies
  • Problem
Photo of Ahmed Haroun
IPFIX multiple destinations
How would i configure ip-fix in EXOS to send the flows to more than one collector? i have two collectors and i need to send the flows to ...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of malik alkhateeb
ECNA certificate
I have chosen the ECNA EXOS eLearning courses but when I did an enroll for this course I only showed the name of the lessons only and thi...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of ar
Question about VLAN Egress Priority at Switches (G3G and C5K, stativc vers. assign by auth))
Hello, I have the following problem: I have a managed 4 Port-Noname-Switch attached at a switch G3G124-24 at port ge.1.4. The managed 4-P...
  • 1 me too
  • 3 replies
  • Question
  • Doesn't Need an Answer
Photo of Yuki Nakamura
The processing of Jumbo frame and L2 forwarding
Hi  Please let me know about the processing of Jumbo frame. I think that the EXOS switch is dropped the jumbo frame, when EXOS switch re...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Christoph
XOS eapol path-through
Is it possible to configure EAPoL pass-through on XOS? I would need it on Summit X430 switches with firmware version 16.
  • 2 me toos
  • 1 reply
  • Question
  • Answered
Photo of Bruno Morim
2: Packet integrity error
Hello, I want to copy the backup file from an Enterasys B5 switch to my Netsight server with the following commande: scp admin@192.168.1...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Lazaro Carrillo
Slow input speed on putty with Exos Summit x250e 48p
I have ssh2 connection to one Exos Summit Extreme x250e 48p on my workplace but the issue is that when I connect to it using putty it tak...
  • 1 me too
  • 1 reply
  • Problem
  • Not a Problem
Photo of Andrew Schulz
Private VLAN routing issue
I've configured a private VLAN for  ports 1 and 2 so that they are isolated from one another. The configuration shown below is how I set ...
  • 1 me too
  • 6 replies
  • Problem
  • Solved
Photo of Javier J. Rejon Orellana
Does the voucher number expire to generate activation keys for the licenses?
We have purchase several voucher numbers for black diamond 8806 core licenses, but we are not going to install it in a couple of years. W...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Ian Broadway
Rx CRC and Rx Jabber
Hello, We're experiencing infrequent CRC/Jabber errors on a particular interface between 2 670v-48x switches.  Switches are running code...
  • 1 me too
  • 4 replies
  • Problem
  • Not a Problem
Photo of EMES
Need Help Scripting Port Changes
I am looking for a push in the right direction. I have some access gear feeding apartments and I am trying to get rid of that gear due to...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Arjumand Qazi
Extreme NAC as intro
Hello, Looking for documentation or video which will enable a newbie like me. the resource should show from A to Z step by step informat...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Edison
SNMP Fails and the log thata appeared is entity_fru_getinfo: Invalid entity 132
Hi , Our switch X670G2 witch core license an version 22.3.1.4 patch1-4. had a problem witch SNMP, it Is failing for about 5 minutes,  and...
  • 2 me toos
  • 3 replies
  • Problem
  • Solved
Photo of M.Nees
VLAN Definition via EMC (Netsight)
Sometimes Netsight 8.0.x does not allow VLAN Definition on new switches. See here - EXOS Switch with V16.2.4.5: If i start MIB Browser...
  • 2 me toos
  • 4 replies
  • Question
  • Answered
Photo of Dave Hanna
Removing stacking from: BootRom
So we had a couple of switches that had previously been in a 4-slot stack. Stacking was disabled but when 2 of these switch where put in ...
  • 2 me toos
  • 4 replies
  • Question
  • Answered
Photo of Leonardo Peixoto
NAC 802.1X Authentication and "Transparent" registration
Hi Guys, I have a customer deploying NAC and they asked me for an "uncommon" feature... The customer is willing to authenticate users (...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Rich
ACL counters not showing
Hi,  I have an ACL defined to manage general access between subnets across switches, and as part of that some rules have counters assigne...
  • 1 me too
  • 10 replies
  • Problem
  • Not a Problem
Photo of Kaon Thana
x450a SNMP Temp sensor not updating
My SNMPv2 monitoring server is set to monitor OID 1.3.6.1.4.1.1916.1.1.1.8.0 (snmp temp sensor) on an extreme x450a (version 12.4.1.7). ...
  • 2 me toos
  • 1 reply
  • Problem
  • Solved