Conversations

Conversations 1 - 20 of 265
Photo of Nico Lueck
Fujitsu Server with Intel X722 NIC compatibility with 5m DAC (10G)
Customer try to connect the Server to a X620 with 5m DA Cable. But there is no link. Do anyone of you have an Idea about the compatibili...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Peter Millard
Firmware download for x450a-24t
I have recent bought an old x450a-24t from Ebay and I am trying to download the latest firmware for this switch. I have bought this fo...
  • 2 me toos
  • 4 replies
  • Question
  • Answered
Photo of Yves Haslimann
Show Last interface status change 200-series
Hello Is there a command on the 200-series Extreme switches to see the last interface change?For example, Last up: 3 daysLast down: 2...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of kjstech
Brocade Ti24x default-gateway will not work if set to VRRP address on EXOS core
Hello, We have two X690 core switches in our network doing layer 3, and they run VRRP between them.  The VRRP address is the default gate...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Saravanamurthy K
24 port 1g copper & 4 port 10g copper
Which extreme switch model is match for 24 port 1g copper & 4 port 10g copper. or else what is an other option for this requirements?
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Danial Jalil
ACL for add-vlan-id
I want to add an ingress ACL to a port that adds a vlan to an untagged traffic. if the traffic is tagged it should add a second vlan. fol...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Alexandr P
switch dont see own S/N
Hello, all! X480-24x(10G4X).4 # sh version Switch      : N/A(-11)     N/A(-11)    Rev 0.0 BootROM: 2.0.2.3    IMG: 16.2.2.4 Does an...
  • 1 me too
  • 1 reply
  • Problem
  • Not a Problem
Photo of Lars Kristian
extremePortEgressRateLimitTable-implementation in firmware
Anyone know when the extremePortEgressRateLimitTable snmp-value is going to be implemented? I need it :) We use rate-limit egress on swi...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Eduardo Mendizabal
TDR or similar cable test diagnostics
Hello everyone, I would like to know if the summit series has any TDR functionalities or similiar failure detection features on copper c...
  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of Sulaiman Al Darmaki
Extreme EXOS VM edition features
Hello guys, i wonder what are the features limitations on the EXOS VM version?
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of gbs
dhcp snooping ipv6
DHCP Snooping works for IPv6? ( in XOS )
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Ilya Semenov
What is the most appropriate network design for this topology?
Hello, everybody! I have a task to totally redesign a huge network which consists of about 150 switches (old enterprise CISCOs). Everyth...
  • 1 me too
  • 8 replies
  • Question
  • Answered
Photo of Ilya Semenov
Netsight MAPS: LLDP, Summits and CISCOs
Hello, everybody! I've added several CISCOs (2960, 3650) and Summits (X430, X440) to Netsight MAPS. All switches are "green" in Devices...
  • 2 me toos
  • 4 replies
  • Problem
  • Solved
Photo of David Gardner
SFP Ports not active
Hi, I am trying to connect to Summit X450e48p via the shared sfp ports. EXOS Ver 12.5.3.9 Server has an Intel X520-2 Nic installed and I ...
  • 1 me too
  • 4 replies
  • Problem
  • Solved
Photo of Tim Smith
Convert Cisco CLI to Extreme EXOS CLI
Hi all, May I ask does Extremenetworks provide convert tool to translate cisco CLI to Extreme CLI? Is someone could help me to translate ...
  • 2 me toos
  • 4 replies
  • Question
  • Answered
Photo of Scott Landry
For (8) x620-8t-2x in a ring, is it possible to disable stacking for the 2x ports (9 and 10) and configure these as ISL uplink ports ?
For (8) x620-8t-2x in a ring configuration, is it possible to disable stacking for the 2x ports (9 and 10) and configure these as ISL u...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of modris bernands
LACP between PaloAlto and ExOS, and then VLAN
We have: - PaloAlto PA-500 (firewall/router) - Extreme X350-48 ver.12.6.2.10 For now we have individual cable for each vlan. like this ...
  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of Terren Crider
Show Port with VLAN name instead of # of VLANs
I have EXOS 21.1.  I would like to know if there is any way to get the output of show port to show all of the VLAN names instead of the n...
  • 1 me too
  • 10 replies
  • Question
  • Answered
Photo of Robert Zdzieblo
How to setup sharing in MLAG for Windows Server NIC Teaming ?
Hello, What is the best sharing algorithm for connecting Windows Server 2012 NIC teaming ? We have a MLAG disign at the core and NIC tea...
  • 2 me toos
  • 1 reply
  • Question
  • Answered
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS
IpArp not learning IP
Hi, i am trying to troubleshoot why IPARP is not showing the IP addresses of edge devices. Slot-1 SEDUCA050100.3 # sh iparp stats ports ...
  • 1 me too
  • 7 replies
  • Question
  • Answered