Conversations

Conversations 1 - 20 of 86
Photo of Karina Del Moral
error ipv4 multicast entry
I open a GTAC case, I just put in this x440 stack (today first day of production) and I got the ipv4 multicast entry error any suggestions?
  • 1 me too
  • 13 replies
  • Question
  • Answered
Photo of Duane Hess
Enterasys/Cabletron techtips archive
The GTAC Knowledgebase (Enterasys/Cabletron) used to have a bunch of techtips.  Is there an archive of those.  For example, if one wanted...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Eugene van Heerden
Port vlan tagged/untagged and Ingress filter (disabled and enabled)
I have been asked an interesting question by our SAP team and I thought it was a simple answer, but on reflection I realized that there a...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of M.Nees
EXOS packet handling - from vlan binding over policy/ACL handling to packet forwarding
i am looking for some detailed information  how an EXOS Switch handle a data packet (beyond the manual). In the old Enterasys knowledge...
  • 1 me too
  • 4 replies
  • Question
  • Doesn't Need an Answer
Photo of Andre Brits Kannemeyer
Rate Limiting traffic on S series Switch
Hi community I am currently testing some rate limiting on a S series switch. The idea is to rate limit all traffic on a specific por...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Jorge Villarreal
Vlan rate limit on B5G124-24P2
Hi Community, Any one aware if it is possible to rate limit a Vlan on the B5G124-24P2 switch? I have a port with 3 tagged vlans and want...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Schmotter, Ryan
B5 switch- port config for VoIP
Hi Folks, I am looking for a B5  sample basic switch config on a B5 switch for a generic VoIP phone (vendor has not been decided yet). Ho...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Abhishek Potdar
Getting a wrong DSCP value while configuring QOS settings
Below is the config on my test environment. I am currently testing with NEC dTerm IP phones and C5K stacks. Trying to make sure QOS sett...
  • 1 me too
  • 3 replies
  • Problem
  • Solved
Photo of Manuel Pineda
Reboot of member of stack: broad_hpc_drv.c(2686) 1809 This is from member 3
Hello all, I have configured a stack switch with 3 members (model B5G124-48P2), and all of them have the same firmware version: 06.71.05....
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Robert_J
sporadic arp issue with C5
in our network with a C5 as a Core Router, we see sporadic connectivity loss of some hosts. These hosts are reachable from the same vlan,...
  • 2 me toos
  • 6 replies
  • Question
  • Answered
Photo of Erik Blanco
logging in enterasys C3G124-24
I have an enterasys C3G124-24 with 06.61.13.0006 firmware. I enabled the console logging and file storage with the command "set logging l...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Leonardo Peixoto
B2Policy License
Hi guys, I'm trying to help solve an odd issue with B2 series Policy for a customer and I'm only allowed to run tests out of working hou...
  • 1 me too
  • 10 replies
  • Question
  • Answered
Photo of Johan Hendrikx
stack grayed out in inventory manager using firmware manangement
I want to do a firmware upgrade using inventory management. The stack is gray out. An other stack I can do an upgrade. Both stacks are si...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Thomas Maddox
Lagging between Fortinet and Extreme SSA
We currently have a pair of Fortinet 1500D the have the internal port(s) connected to a C3 stack.  I would like to take it off the stack ...
  • 1 me too
  • 12 replies
  • Problem
  • Solved
Photo of jeronimo
Extranet: Organization vs. individual accounts
Hi there, Currently we are three people in our company having accounts in the Extranet. As far as support is concerned this works ok. As...
  • 3 me toos
  • 1 reply
  • Question
  • Answered
Photo of Eugene van Heerden
XSR18xx / XSR3250 / SSA / N1 (2G4082-25) and DSCP46 without Policy
Hi all, I need some clarity on how the XSR and A/B/C-series switches handles packets marked with DCSP 46 (Expedited Forwarding). The Sc...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Luis Oliveira
N-series firmware 5.13.04 show support equivalent command
I'm looking for show support equivalent command to firmware 5.13.04 version. Can someone help me?  Many thanks for all
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Peter Brent
get 'destination host unreachable' with a simple connection (ethernet cable) between a PC and server
Doing a simple connection (ethernet cable) at home between a PC and server. I get 'destination host unreachable' - I have configured bo...
  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of Shuo Tseng
How to set policy for drop STP packet
Hi, How to setting policy for deny STP packet? Our network become very slow, because our wireless APs has transmit a lot STP packet. Ou...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Raymond Borg
Difference between S1 and S1A Chassis
HelloI have been reading some S1 Chassis Datasheets.  I have noticed that these Datasheets are always reffering to the S1 Chassis as "S1A...
  • 1 me too
  • 1 reply
  • Question
  • Answered