Conversations

Conversations 1 - 20 of 64
Photo of Matthew Tedder
XOS 12.6.1.3 stack crashes after 1555 days uptime
We have two Extreme stacks that have shown the same behavior at 1555 days uptime: Slave switch breaks out of stack and becomes 2nd maste...
  • 1 me too
  • 8 replies
  • Problem
  • Solved
Photo of Ehab EL Hagar
Need VSP 9000
I need to buy Fabric module that is used with VSP 9000. if anyone has one "new or used" i'm ready to buy
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Richard Applebee
v8 capacity planning
A feature that we used quite a bit in NetSight was Capacity Planning which could be found on the Tools menu in Inventory Manager. With th...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Alok Shukla
Can we enable stack on already been configured X440-g2 switches or does we have required default setting for enabling stack?
Can we enable stack on already been configured X440-g2 switches or does we have required default setting for enabling stack?
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Christina M
ERPS now available on Industrial Switches
Extreme is happy to announce that you can now configure ERPS on an ISW Industrial Switch! For configuring ERPS from the web interface, ...
  • 7 me toos
  • 3 replies
  • Article
Photo of Jared Harvey
How to Find NetGear Switches using Extreme Management Center?
As I roll out Network Access Control and 802.1X, I'm finding that when a device fails to authenticate via 802.1X, it's due to the device ...
  • 3 me toos
  • 1 reply
  • Question
  • Answered
Photo of Karina Del Moral
Tips to find root cause of problem
latency of some computer in one specific vlan, Not all of the computers are affected, but it is increasing... checking traffic on ports, ...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Martin Flammia
Stop layer 2 loop with legacy to MLAG pair
Hi, The design intention is to provide connectivity to VLAN X & Y should either one of the legacy cores fail, unfortunately it has to be...
  • 2 me toos
  • 5 replies
  • Question
  • Answered
Photo of Ivan Vera Torreblanca
Recommended DVR for AP3916ic
I' ́m on a deployment with 20 APs and need to know if there is a reccomended dvr to work with thw cameras of the AP3916ic.
  • 2 me toos
  • 3 replies
  • Question
  • Answered
Photo of Tim Smith
Convert Cisco CLI to Extreme EXOS CLI
Hi all, May I ask does Extremenetworks provide convert tool to translate cisco CLI to Extreme CLI? Is someone could help me to translate ...
  • 2 me toos
  • 4 replies
  • Question
  • Answered
Photo of Arjumand Qazi
Network design and implementation template for Extreme Networks
Looking for Design and implementation template if extreme has only or a guideline that must be followed. My employer asked me to prepare ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Anu
RESTCONF API requirements
What are the mandatory RESTCONF API requirements to be complied by an application/server exposing RESTCONF API (with XML or JSON payload)...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Christina M
What do you wish Extreme knew about you and how you use our products?
Extreme wants to know more about our customers and users. What do you wish we knew about you, your environment, your products, your...
  • 6 me toos
  • 2 replies
  • Question
  • Doesn't Need an Answer
Photo of Luca Messori
Integration of trend Micro Control Manager solution with Extreme Networks through the Distributed IPS Connect module
I've done a lab on the integration between the TMMC and the Extreme Networks solution using the Distributed IPS connect module present on...
  • 4 me toos
  • 2 replies
  • Article
Photo of Drew C.
FN-415, WS-C35 WLAN Appliance may fail due to degradation of clock signal
Extreme Networks recently became aware of an issue from one of our Suppliers that impacts the WS-C35 WLAN Appliance. This issue requires ...
  • 2 me toos
  • 8 replies
  • Article
Photo of Matthew Terhune
IP Helper Equivalent for PXE Boot
We are interested in setting up PXE boot across multiple subnets in our environment, for client imaging. With, e.g., a Cisco switch, the ...
  • 2 me toos
  • 9 replies
  • Question
  • Answered
Photo of Drew C.
Welcome the Embassadors group, EtherMAN!
Please join me in welcoming EtherMAN to The Hub's Embassador program! I had the pleasure of meeting him in our NC office a few weeks ago ...
  • 5 me toos
  • 11 replies
  • Announcement
Photo of James A
ExtremeManagment alarms with MS Teams/Slack etc.
Many years ago there was a NetSight feature called isaac which would post updates to social media. At the time I was rather dismissive of...
  • 2 me toos
  • 1 reply
  • Idea
Photo of Mrxlazuardin
SummitStack-V320 Stacking Bandwidth Capacity
Hi, I'm still confused with SummitStack-V320 stacking bandwidth capacity. Isn't it 320Gbps (4x 80Gbps) full duplex bandwidth? Following ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Geoff Mather
SNMP Extreme Stack Member Table Missing Data
I have a couple Stacked Summit X250/X450 and I'm having trouble using the extremeStackMemberTable SNMP table. The OS version of these are...
  • 1 me too
  • 7 replies
  • Problem
  • Not a Problem