Conversations

Conversations 1 - 20 of 36
Photo of Tamera Rousseau-Vesta
At Last...VISIO STENCILS!
All Visio stencil links have been moved to our main website:  http://www.extremenetworks.com/support/visio-stencils Please use the links ...
  • 9 me toos
  • 32 replies
  • Article
Photo of Peter
ZTP+ good feature but unusable in real
I'm currently running XMC / Netsight 8.1.2.59 or newer and like to use ZTP+ I like this feature, because I only need to connect switches ...
  • 3 me toos
  • 7 replies
  • Problem
  • In Progress
Photo of Martin Flammia
VRRP best practices, preempt, tracking, fabric routing, accept-mode, host mobility
Hi There, Apologies for this question being a little long.... Just looking into the communities thoughts around some best practices aro...
  • 3 me toos
  • 5 replies
  • Question
  • Answered
Photo of Drew C.
ExtremeXOS 22.5.1 is now available!
Hello community, We are pleased to announce the availability of the EXOS 22.5.1 release. Several significant features/capabilities have ...
  • 2 me toos
  • 4 replies
  • Announcement
Photo of Tim Smith
ACL in EXOS
Hi expert, I write an ACL and apply it to port 39 to deny all other traffic(only permit 2 host), but the deny not work. Could you please ...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Daniele Cerboni
Document listing and describing X460 switches alarms and counters
Hello Community, We are in the process of integrating X460 switches running EOS 15.5.2.9 with a customer server handling alarm traps and...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Javier J. Rejon Orellana
Does the voucher number expire to generate activation keys for the licenses?
We have purchase several voucher numbers for black diamond 8806 core licenses, but we are not going to install it in a couple of years. W...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Prabhu.M
X460-G2 Stacking Capacity?
Kindly let us know what will be output and can it act as Layer 3 switch  i) Throughput Capacity wirespeedMpps (switch / stack) ii)Switc...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Peter
Netsight LDAP Authentication of Groupmembers
Hello, I'm currently changing my Netsight-Authentication from OS to LDAP (MS Active Directory). I've 2 groups in AD. 1 for admins and...
  • 1 me too
  • 7 replies
  • Problem
  • Solved
Photo of M.Nees
Are Enterasys GVRP and XOS MVRP compatible?
We used C5 Enterasys Switches (Edge) and S-Series (Core) in our network.To provide VLANs automatically to the switches we are using GVRP....
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Siva
Two extreme switch can ping each other
Good day all I have been looking around if this has been ask and answer it seems I can’t find any. I have a problem with two extre...
  • 1 me too
  • 9 replies
  • Problem
  • Solved
Photo of Ronald Dvorak
firmware download page too complicated
I'd like to upgrade my EMC but I don't plan to search for minutes on the download page for the right file. Example: I'm sorry but eithe...
  • 21 me toos
  • 17 replies
  • Problem
  • In Progress
Photo of Peter
XOS LLDP announce management IP
Hello, is there a way in XOS to announce a IP-address non vr-mgmt/mgmt-vlan in LLDP management address? most of my customers didn't use...
  • 3 me toos
  • 4 replies
  • Question
  • Answered
Photo of info@systemhaus-genthin.de
220 Switch SFP+ Port with 1 GBit Modul ?
can anyone confirm or has tested a 220 Series Switch with sfp+ Ports but  using an SFP 1 Gbit Modul in this Slot  ? I have a Scenario w...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Peter
Loop Protection in MLAG Desgin with non-exos edge
Hello, I'm looking for a solution to realise loop protection in MLAG design with non exos edge-switches. - a dedicated STP-domain per e...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Peter
search Endsystems in EMC Netsight Oneview 8
Hello, is it possible to search for Endsystems via Oneview Search in EMC without NAC/Netlogin/Radius? I thought this should work in envi...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of M.Nees
EOS - S-Series: Sending Trap if broadcast suppression limit is reached
Is it possible that s-series (or K or 7100) are send an traps if the broadcast supression threshold value is reached ? I do that with al...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Mark Bayliss
UPM - Configure port dispay-string based on LLDP device system name
Hi, We have a UPM device-detect profile in place and would like to configure the port display-string based on the device connected syste...
  • 2 me toos
  • 3 replies
  • Question
  • Answered
Photo of Peter
X440G2 Stack loose sharing-config during reboot master-change
Hello, I had problems with X440G2 Stacks in the past... When I rebooted the stacks, they often change their master role and during this...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Rod Robertson
X440-G2 port license upgrade
I am confused over the licence required to upgrade a X440-G2-48P-10GE4 switch , so that the 2 copper ports can run at 10G rather than IG ...
  • 1 me too
  • 6 replies
  • Question
  • Answered