Conversations

Conversations 1 - 20 of 40
Photo of Sharoz Khan
what are the VPN protocols supported by etreme Network switches with model ? and How we configure it on extreme switches ?

  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of Richard Applebee
v8 capacity planning
A feature that we used quite a bit in NetSight was Capacity Planning which could be found on the Tools menu in Inventory Manager. With th...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of arabinda mohanty
Is this possible to configure AP-3805i in standalone?
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Stéphane NOBLET
Use fix 5GHz RF channels for AP7131 Wing 5.4
Dear, I'm using three Wifi AP7131 for a wifi load balancing application. I use the 5GHz band and want to use a fixed channel for each one...
  • 2 me toos
  • 9 replies
  • Question
  • Answered
Photo of Daniel Moll
WLAN-Controller C5110 v9.21 to C5210 v10.31
Hello Community, i have a question regarding a Controller-Migration, from C5110 v9.21 to C5210 v10.31. Right now the Controllers a runn...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Rich Upshaw
AP Data Sheet Radiation Patterns
Hi, I've been researching this topic and I'm still trying to wrap my head around the radiation patterns and how they play out three-dimen...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Steve Ballantyne
Clients connecting to AP's that are too far away
What would cause my wireless clients to overlook AP's that are close by (directly overhead) and maintain a connection to AP's that are se...
  • 1 me too
  • 9 replies
  • Question
  • Answered
Photo of Steve Ballantyne
Custom Flexview returns null values in Netsight web page (but works in console)
Hello Extreme Friends, I was fooling around with trying to add some Liebert UPS's to Netsight for monitoring. I did the process of impor...
  • 1 me too
  • 2 replies
  • Problem
  • Solved
Photo of Jeremy Bullock
How to setup bridge at controller
We are currently running on Bridge at the AP and would like to move to Bridge at the Controller for one of our wireless VLANs. I'm just ...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Laura
Install of 3605/3610 APs
How should the 3605/3610 APs be mounted? What does their antenna pattern look like? Is it a donut shape? Can these APs be wall mounted an...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Gabriel Bagita
How to create a report based on vendor specific MIB in OneView
We would like to monitor the status of the FortiGate firewalls. We added them to the NetSight Management, but it reports only the device ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Transporter
Netsight as a status display
Hi Hub I would like to use netsight as a permenantly displayed graphoc on a wall screen and have already set up maps I want displayed.  ...
  • 1 me too
  • 9 replies
  • Question
  • Answered
Photo of MartinS
How to get PowerSupply Serialnumbers of S-Series Switches via NetSight?
Hi there, How can I get PowerSupply Serialnumbers of S-Series Switches via NetSight? 71K, 71G, C3 and K-Series is working :-) I'm using...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Ronald Dvorak
ExtremeWireless - V10.21 - no fixes ?
Hi, now that 10.21 is finally released I've checked the release notes and the version doesn't include any new fixes. The GTAC told me 2...
  • 3 me toos
  • 8 replies
  • Question
  • Answered
Photo of Rich Plummer
Fiber connection from switch to server-No Link
Hello Everyone, I have an Enterasys B5K124-48P2 with a FTLX8571D3BCL-EX SR SFP+ module installed in port 49. On the other end is a Lenovo...
  • 1 me too
  • 9 replies
  • Question
  • Answered
Photo of Laura
Roaming issues
C5210 controllers with 9.21.10.5 and 3605/3610 APs. Does anyone else in a school district setting have roaming issues and ways to improve...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of Rich Upshaw
3800/3900 series Wired Port Identification
I'm trying to map ports to my switch to form lags to some 3800 series Access Points.  I'm having trouble identifying LAN1 vs. LAN2 wired ...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Ronald Dvorak
EMC maps - no style / draw wall option
I'm running EMC 7.0.6.27 with a valid NMS-ADV-U license but don't see the option to draw walls. The map proberties are set to floorplan,...
  • 1 me too
  • 1 reply
  • Problem
  • Solved
Photo of Laura
What should I set my radio settings to on my APs?
I have a C5210 controller with 3605/3610 APs. We have our APs deployed in school in almost every classroom. We have 1:1 in every school. ...
  • 2 me toos
  • 6 replies
  • Question
  • Answered
Photo of Joshua Sanders
s series worth it?
My company is looking to do a layer2/3 forklift and finally retire our trustworthy N7s and C series switches. I'm going to be considering...
  • 1 me too
  • 3 replies
  • Question
  • Answered