Conversations

Conversations 1 - 20 of 154
Photo of Martin Flammia
Fail open port / user authentication
Apologies in advance if this is an easy one...Basically the question is in EXOS, what would be the configuration to fail authentication o...
  • 2 me toos
  • 6 replies
  • Question
  • Answered
Photo of scyntre
Nodealias info in XMC
In the java Console we get a historical nodealias for our users who plug into the network - does this exist on the XMC web side? I can't ...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Anton Sax
NAC Authentication Problem with Client using INTEL AMT
Hy,We run NAC since about 1 year, now some Client machines are replaced with new ones.The new clients (HP RP9 G1) have Intel AMT Manageme...
  • 1 me too
  • 4 replies
  • Problem
Photo of SH
XMC remote backup
Hello,does anyone of you write the XMC backup (XMC as a virtual appliance) to a remote share that is included in the directory system of ...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Steve Ballantyne
After upgrading to XMC 8.1.4.40, all AP's show as down?
Hello all,I just ran an upgrade on my XMC server to version 8.1.4.40. When it came back up, it shows all of my wireless access points as ...
  • 1 me too
  • 4 replies
  • Problem
  • Solved
Photo of Johan Hendrikx
Add a task got err 'Coiuld not lod report'
When I add a scheduled task or edit one, I got the error 'Could not load report
  • 1 me too
  • 4 replies
  • Problem
  • In Progress
Photo of SH
XMC - No duplex information for Cisco Switches
Hello everybody, I manage some Cisco switches with XMC. All works fine but I in the "Interface Details" view (device menu -> Portview->N...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Andre Brits Kannemeyer
XMC (Netsight) ISO Deployment Guide
Hi Community I am looking for the XMC (Netsight/EMC) ISO deployment guide. The installation guides only cover VM deployment, windows dep...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Giuseppe Montanarella
mac to role for VoIP Phones and TVCC
Good Evening, I am going to configure a new EMC to manage different Switch EOS and XOS. Because I am new with this Software I want to kno...
  • 2 me toos
  • 4 replies
  • Question
  • Answered
Photo of Pionio
MAC Authenticate Enterasys C5 in Extreme X450
Hello I want to mac authenticate C5 with X450. In X450 I enabled netlogin mac auth and tested with other X450 but when a connect C5 lin...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Ian Broadway
Separate Wireless and Wired End Systems - Extreme Control
Hi All, Is there anyway this can be done, ideally without having to use a filter everytime I browse to the end systems tab in EMC? I wo...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Ilya Semenov
NAC appliance is red in console, but green in XMC
Hello, team, after reboot NAC is red in Console, but green in XMC. As result, nothing works. I've read: https://gtacknowledge.extreme...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Lakshmi Narayan
netsuite
i want to use nms for summit x440 switches and wireless c 5210.how is it possible.tell me step by step 
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Johan Hendrikx
Verifying NAC Appliance's RADIUS Configuration for each Switch
I've configured radius on the EAC and  a switch in my lab. Also configured SNMP on both devices. Shared secret is the same.  I dubble che...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of cornuejols
Extreme management centre 8.1.3.65 55XX SAVE
hello How y can save 5520 with emc perhaps with script Tools? by ctrl y ?
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of kaumell
extreme management center set user password
I am trying to add a new user to EMC (other than root) in version 8. I can add the user and add them to the authorization group, but cann...
  • 2 me toos
  • 3 replies
  • Question
  • Answered
Photo of Stephen Stormont
Log into switch with LDAP credentials
Currently, we are using accounts created on each switch in order to be able to login. We do have Extreme Management Center 8.x installed...
  • 2 me toos
  • 15 replies
  • Question
  • Answered
Photo of Johan Hendrikx
No DHCP fingerprints in EAC after configuring bootrely to the appliance
No DHCP fingerprints in EAC after configuring bootrely to the appliance. I configured bootprelay to my EAC appliance and noticed that the...
  • 1 me too
  • 4 replies
  • Problem
  • Solved
Photo of Johan Hendrikx
nac display wrong wireless Switchport in NAC v8.1.3.65
In NAC the end-systems are linked to the wrong switchport. Other end-systems are linked to the right switchport.How to resolve?
  • 1 me too
  • 1 reply
  • Problem
  • Solved
Photo of Ilya Semenov
NAC portal for wifi-users: UserNames are not displayed in XMC>>Wirelles>>Clients
Hello, team, I've partially configured V2110&NAC integration. There is a webportal on NAC, where wireless users login using their AD cre...
  • 1 me too
  • 5 replies
  • Problem
  • Solved