Conversations

Conversations 1 - 20 of 24
Photo of Yves Haslimann
REST API Login for Extreme Cloud
Hello everybody I'd like to login to the Extreme Cloud by REST API. I found the following information: server: ezcloudx.com; POST; mana...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Yves Haslimann
Sending flow data from a switch direct to ExtremeAnalytics (without a flowcollector engine)
Hello everybody I would like to configure the Extreme Switches (x440-G2, with version 22.4) to sending sflow/netflow data direct to the ...
  • 2 me toos
  • 16 replies
  • Question
  • Answered
Photo of Yves Haslimann
Show Last interface status change 200-series
Hello Is there a command on the 200-series Extreme switches to see the last interface change?For example, Last up: 3 daysLast down: 2...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Yves Haslimann
Report or FlexView to find ports with more than 3 MAC addresses
Hello everybody I'm searching for all switchports with more than 3 MAC addresses. The goal is to find unmanaged switches in my network. ...
  • 2 me toos
  • 5 replies
  • Question
  • Answered
Photo of Yves Haslimann
Authenticate only the access point (B@EWC) on a switchport
Hello everybody I'm using x440-G2 switches with a valid netlogin configuration for all access ports (1-48). All clients authenticate fin...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Yves Haslimann
404 - Not Found after EMC Upgrade from 7.1.3.25 to 8.0.3.53
Hello there, after EMC upgrading from 7.1.3.25 to 8.0.3.53 i have a web page error 404 - Not found Checking system database had some er...
  • 1 me too
  • 5 replies
  • Problem
  • Solved
Photo of Tarek Elwan
is it possible to open mySQL database from Microsoft power BI or excel or external application?
I want to access mySQL database from external application, is this possible to access it by Excel or power BI
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Yves Haslimann
Request switch SNMP MIB-entry over Webservice (REST / SOAP)
Hello everybody, I would like to request a specific SNMP OID value over the Extreme Management API. Firstly, is this possible? Secondly...
  • Yves Haslimann, 9 months ago

  • 1 me too
  • 0 replies
  • Question
  • Doesn't Need an Answer
Photo of Raghurajan, Sandeep
port status of unused ports in netsight
Hi, I have a customer who would like to view the unused ports report from Netsight for all his EXOS switches. I had contacted GTAC and I ...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Jeremy
Expand Virtual Hard Drive Netsight VM
We have the VM of NetSight.  The VM creates a 100 Gb drive and that is already filled up.  I would like to expand the virtual drive to 20...
  • 2 me toos
  • 9 replies
  • Problem
  • Solved
Photo of Yves Haslimann
show username in OneView if I do 802.1x with computer certificate
Hello everybody have an extreme switch (x430-8p) which has configured port 1 like this: configure netlogin vlan v0889-netlogin enable ne...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Yves Haslimann
Blank Analytics Dashboard
Hello, I have a blank Analytics Dashabord, although I see thousands of flows in the tab "Application flows". The Application Flow table s...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Yves Haslimann
access point time zone
Hello, I have several access points managed by the IdentiFI Controller. Is there a way to configre on the AP's a NTP and a timezone? I...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Sumit Johari
what is commands to configure dns in extreme switch?
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Yves Haslimann
slow ssh response on extreme switch
Hello, I takes between 5 to 10 seconds until the SSH Login window appear, if I connect by SSH to the switch. I have the version 21.1.3.7...
  • 2 me toos
  • 5 replies
  • Problem
  • Solved
Photo of Justsomebodi
IdMgr.MoveIdFmEnblToDsblPort Log messages
Hi Does anyone have an idea what caused this message <Warn:IdMgr.MoveIdFmEnblToDsblPort> Slot-1: Moved the identity "Unknown_xx-xx-xx-xx...
  • 2 me toos
  • 4 replies
  • Question
  • Answered
Photo of Yves Haslimann
Increase the SNMP poll interval timeout
Hello, I have Extreme OneView running on the main site. From there, I have an unstable vpn to a remote site. Because of this, I receive a...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Yves Haslimann
Exclude the switch from NAC temporary
Hello, I have an extreme NAC solution running. For maintenance reason, I would like to exclude a switch temporary from NAC. So after exc...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Yves Haslimann
Assign one untagged and several tagged ports thru 802.1x with MAC Authentication. (NAC)
Hi, I have an extreme NAC solution which has 802.1x-rules with MAC authentication configured. In my network there are several VLAN's. M...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Yves Haslimann
maximum recommended clients per access point
Hello there, We noticed client disconnections in our WLAN network. The clients are connected in the 2.4Ghz band with the access point AP...
  • 1 me too
  • 3 replies
  • Question
  • Answered