10..11 - application visibility - supported on all APs ?

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
Is the feature working with all APs that are supported in v10.11 i.e. AP3705i ?

Thx,
Ron
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,306 Points 20k badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Schmotter, Ryan

Schmotter, Ryan, Employee

  • 590 Points 500 badge 2x thumb
Hi Ronald,
This is only supported on the AP38xx and newer
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,306 Points 20k badge 2x thumb
Thanks Ryan
Photo of Pala, Zdenek

Pala, Zdenek, Employee

  • 8,474 Points 5k badge 2x thumb
Hi Ronald.

You can use Application Analytics with our wireless = you need NMS-ADV + EWC + AP37xx or 38xx or 39xx and probably also PV-FPM-xx

If you want app analytics and enforcement then AP38xx and AP39xx + EWC...

Regards

Z.
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,306 Points 20k badge 2x thumb
So in short I'd need a suitcase full of money :-)

I've the full EMC/Analytics solution running in my lab but wasn't sure which restrictions there are in regards to the controller build in feature (might be a good idea to add this in the release notes).

For smaller customers it's a nice to have feature IF they have the APs to support it.

BR
-Ron
Photo of Aguilar, William

Aguilar, William, Employee

  • 2,664 Points 2k badge 2x thumb

Smaller customers can use ExtremeCloud with AP3805i-ROW/FCC or AP3935i/65i which support L7 visibility and control.

:-)