cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

10Gb SFP+ 10GBASE-T capabilities

10Gb SFP+ 10GBASE-T capabilities

Ilya_Semenov
Contributor
Hello, everyone,

I've found a very intersting item in the price:

10338 10Gb SFP+ 10GBASE-T 10Gb SFP+, 10GBASE-T RJ45, 30m with Cat6a

Could somebody please tell me:

1) Does it work in all Summit's and 220's SFP+ (10Gb) ports?
2) How many 10338 10Gb SFP+ 10GBASE-T transceivers could I plug into X670 (gen1, gen2)?

Many thanks in advance,

Ilya

P.S. Does Extreme have mGig (2,5Gb, 5Gb, 10Gb) swithes at the moment?
12 REPLIES 12

Tomasz
Valued Contributor II
I'd try with 10065 1000BASE-T SFP module. It was supported in X670 so should be in X670-G2 either. Extreme has to update the supported optics matrix in WW_Reference_Info available for partners (last update was some time ago...).

Have a look at this thread: https://community.extremenetworks.com/switching-routing-90302/how-to-configure-1g-baset-spf-in-summit-x670-g2-6641245#post15655800

Kind regards,
Tomasz

Larry_Kunz
Extreme Employee
Hi, Ilya. You can check the compatibility for all optical devices using the Hardware/Software Compatibility Matrix.

Item 10338 is compatible with most of the G2 switches: X440-G2, X450-G2, X460-G2, X620, X670-G2, X690. You can use it in up to half of the 10Gb ports. The exact wording of the usage note is Populate every other SFP+ port in system, with a maximum of half the 10Gb SFP+ ports configured with 10GBASE-T transceivers. An adjacent SFP+ port should remain unused for every 10GBASE-T SFP+ installed.

10338 is not compatible with the 200 Series switches.

Hope that helps.

Larry Kunz
Information Development
Extreme Networks

The limitation is still in effect.

10GBASE-T SFP+ (PN 10338) can negotiate also at 1Gbps?
GTM-P2G8KFN