10GBASE-LR/LW XFP problem

  • 0
  • 1
  • Problem
  • Updated 3 years ago
  • Solved
Hi, colleagues!

Have esome strange issue:
X460-48x
XGM3s-2xf
install 10GBASE-LR/LW XFP modules, connect them with optic patch and ports not up.
Try with other XGM3S-2xf, try with other transceivers, with other optic patchcord - nothing help.
Some outputs:
#deb hal sh op
Port                       49Media Type       XFP_LR
XFP Vendor:         OEM
XFP Part Number:    XFP-10G-LR
XFP Serial Number:  S1106013011
XFP Revision:       A
Date Code:          110819
Transceiver Type:   XFP
Connector:          LC
10GE Compliance:    10GBASE-LR/LW
XFP Supported:      no
 # sh ports 49-50 configuration no-refreshPort Configuration
Port     Virtual    Port  Link  Auto   Speed      Duplex   Flow  Load   Media
         router     State State Neg  Cfg Actual Cfg Actual Cntrl Master Pri Red
================================================================================
49       VR-Default  E      R   OFF 10000       FULL                   !XFP_LR
50       VR-Default  E      R   OFF 10000       FULL                   !XFP_LR

Any thoughts?

Thank you! 
Photo of Alexandr P

Alexandr P, Embassador

  • 12,768 Points 10k badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Alexandr P

Alexandr P, Embassador

  • 12,768 Points 10k badge 2x thumb
Official Response
Hi, colleagues!

Issue is resolved.
It's known bug xos0060721

One of the symptoms:
- when reject XGM3S-4sf from switch, XFP modules normally working in XGM3S-2xf on all versions of EXOS.

Thank you!
Photo of Chad Smith

Chad Smith, Alum

  • 5,660 Points 5k badge 2x thumb
Official Response
There is now a GTACKnowledge article for this problem:  Link not coming up in ports in XGM3S-2xf