2016-01-25: New GTAC Knowledge Articles January 17 - January 23, 2016

  • 0
  • 1
  • Article
  • Updated 2 years ago
  • (Edited)
Here are the new articles that were published January 17 - January 23, 2016 in GTAC Knowledge:

Sunday, January 17, 2016:
Unable to perform IPv6 flow entry on X670-G2 switch

Monday, January 18, 2016:
POE over budget on a B5 or C5 SecureStack
Execution Sequence for EOS Policy Rules
Does Securestack Support BGP?
Switch is not sending Spanguard Traps
S/N-Series "Switch Node & Alias" top process running close to 100% of total CPU's utilization
S-Series L2 IGMP multicast not working over vxlan
IdentiFi Wireless - Active AP Report only showing channels 36 and 149 as being used
How to request a NetSight Eval license
VN 2015 002 Leap Second
VN 2015 001 GHOST
VN 2014 005 NTP Threats
VN 2014 004 GNU Wget Threat
VN 2014 003 Poodle OpenSSL 3.0 Threat
IdentiFi Wireless with iStat Blood Analyzer connectivity issue

Tuesday, January 19, 2016:
Adding backup MSM to Black Diamond
TX pause getting enabled on the stack ports/BlackDiamond fabric ports when using the keyword "all"
Where Are User Created OneView Scripts Stored
Constant reboot of C5 with message in logs common_rx_pool
S-Series PBR Not load Balancing to Next-Hop Configured in Route-map
What is the last Firmware Released for the IdentiFi C2400?
How to configure RADIUS on SecureStacks for switch user login
VN 2014 002 GNU Bash Threats (Shellshock)
VN 2014 000 OpenSSL Heartbleed Threat

Wednesday, January 20, 2016:
OFConect Lightspeed configuration
Can the EDP packets be disabled on an EXOS device ?
How to change next hop within S-Series route map
Summit logs "Exception Cause=reserved instruction" while booting up
How to enable debug logging on a WM Controller
Can I poll multicast routing information into Netflow?
Unable to load OneView Reports tree or device reports, and error prompt in OneView
Netsight: Firmware Wizard in Inventory Manager fails to launch
How do I configure RIP v2 on a Securestack?

Thursday, January 21, 2016:
Burn port for GRE tunnel has to be changed to alternate port to activate
Warning: The Backup stack node is not as powerful or as capable as the Master stack node.
Ports stop forwarding traffic to static fdb entry after failover
Ports stop forwarding to static fdb entry after link flap or disable/enable LAG port
How to display the local FDB tables
flow-redirect cannot be deleted
MACsec license is not being accepted on switch
How to troubleshoot PTP Boundary Clock Configuration
Multicast not routing through S-Series
NAC SMS Text or Email Verification Code Is Invalid When Using iOS or MAC OS Devices
S-Series LSNAT Servers in Down State
SummitStack Slot stuck in "Mismatch" state
What is the syntax for WiNG 5.4.x to configure the number of clients allowed to associate with a radio?
Do rejected ARP requests go to the switch CPU?

Friday, January 22, 2016:
Siem: Dashboard Warning that the Storage Partition not Accessible
Netsight: License Key Expired, New License not Accepted when Launching Console

Saturday, January 23, 2016:
Where are NetSight instructions for installing on a virtual appliance
Photo of Thomas, Ken

Thomas, Ken, Alum

  • 4,368 Points 4k badge 2x thumb

Posted 2 years ago

  • 0
  • 1

Be the first to post a reply!