cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

2016-04-25: New GTAC Knowledge Articles April 17 - 23, 2016

2016-04-25: New GTAC Knowledge Articles April 17 - 23, 2016

Ken_Thomas
Contributor II
Here are the new articles that were published April 17 - April 23, 2016 in GTAC Knowledge:

Sunday, April 17, 2016:
none

Monday, April 18, 2016:
Bad NVRAM message seen in K-Series logs
How to disable a port on a non Extreme XOS device in OneView
How do I reboot a Virtual Controller via the CLI
Unable to use USB to download image to the Summit X620
getQSFPInfo(751) Error reading eeprom

Tuesday, April 19, 2016:
Is there a way to know what the platform type is from the MAC address?
pop-up URI too long for many APs in AP multi-edit
Unable to remove DHCP Server Configuration when LAG port is added in VLAN
What command is used to find the MAC address for a particular port?
After S-Series firmware upgrade, one or more SFP+ ports may fail to properly forward traffic
Does the Hyper-V version of the V2110 include Linux Integration Services?
Warn:ACL.Policy.IntAppConfFail errors seen in logs
Access Point will not attach to the Wireless Appliance when Secure Tunnel is enabled.
How to Determine if S-Series is Configured for Static or Dynamic Routing

Wednesday, April 20, 2016:
Show tech-support terminates prematurely when 40G or 100G optics are present
Where can I access Data Sheets for my XOS products
Configure NAC RADIUS Return Attributes For Captive Portal Redirect On Cisco Wireless Controller
Configure NAC RADIUS Return Attributes To Allow Management Access To Cisco Wireless Controller
Logs Show Repeated DC/Temperature Events on Power Supply
Does an IdentiFi Wireless WDS Bridge support encryption?
Does toggleing Switch Seven Clear All Backed Up Configs and Core Files from NVRAM on the N-Series?
AP3825 cannot be powered when connecting both LAN ports on the same PoE switch.

Thursday, April 21, 2016:
NAC: When adding an End System to a Blacklist, the rule is not triggered
NetSight: Can you configure port groups within OneView?
Summit Slot-1: shid: bad plugin module temperature
Password Recovery for the Matrix V2
Purview: What permissions does a user need to have to have read-only access to Purview reports?
Purview: How to migrate data from one appliance to another
Siem: Can you regenerate your license keys the file created when performing an export of keys?
Dragon: Cannot download license key file from the support site
Siem: What is the upgrade path to upgrade the Siem to the latest version
NAC: How to access the Managing NAC certificates window
How to re-authenticate 802.1 x users every hour using FreeRADIUS
7100-Series Flash[1.tXbdService]ll_read: Read error
Reset with dot1s_task(0xac24038) and broad_l3_mcast:Error 0xFFFFFFFC
What is the command to restrict unknown unicast flooding during EAPS or STP failover
STP Auto-Edge Port Condition Statement
rx bpdu is corrupt

Friday, April 22, 2016:
What is the SNMP OID to retrieve System Power Usage?
How to access the Default Work Week Time group in NAC Manager
Secure stack switch with error Last switch reset caused by cardmgr_util.c(698): Error code 0xff01000...
Netsight 6.0 custom alarm criteria Source IP Address no longer triggering from SNMP event
Broadcast and multicast packets being flooded across EXOS switches while using RSTP
Siem: How do you request an license for the G2 Siem products?
How to create a new Inventory Manager script to a VR other than VR-Default or VR-Mgmt
Dragon: What permissions are granted by the DragonViewAdmin role?
Rebooting and upgrading X670 switch not showing GBIC type and no link status (Link down)

Saturday, April 23, 2016:
What are the Policy Role limits on E1
2 REPLIES 2

Daisy_Miller
New Contributor
Thanks for sharing!

Ryan_Mathews
Extreme Employee
This list represents the most recent content published out to GTAC Knowledge. Thanks Ken for posting!

With that said, the team is continually improving content in the KB as we learn more about each issue and you give us feedback. We publish these changes out immediately so expect all of our content to improve over time. That's why it pays to search early and often as you troubleshoot.

We've made it a lot easier to search for content on the topic you're after with Unified Search.
Check it out: http://www.extremenetworks.com/search

Here's an example of a Search spanning the Hub, GTAC Knowledge and our Product Documentation all in one query. It's also super fast (returned in 0.01 seconds).

I think you're going to like it!

66eaa51f43cd4ac69eacd836aa9a542c_RackMultipart20160427-34602-1r9dw6p-Search___Extreme_Networks_inline.png


GTM-P2G8KFN