2016-08-15: New GTAC Knowledge Articles August 7 - 13, 2016

  • 0
  • 1
  • Article
  • Updated 2 years ago
  • (Edited)
Here are the new articles that were published August 07 - August 13, 2016 in GTAC Knowledge:

Sunday, August 07, 2016:
none

Monday, August 08, 2016:
Config Manager has suffered a critical error - Failed to connect to database 'controllerConfig'
What are MIBs/OIDs for S-Series
Extreme Control Center - How to use Discover to identify Network devices
Securestack Not Powering PoE Devices but Wired Devices Work on Same Port
How to kill the BCMDPC process responsible for high CPU utilization
WS-AP3705i Not Registering to the Controller
Unable to remove deleted VLAN from database
How to replicate NAC configuration if NetSight server is completely lost
Is the Change of Authorization feature available in EXOS?
Meaning of "[bcmDPC]unit 0 WRED_THD_1_CELL entry 182 parity error" log message
What is the meaning of kernel oops

Tuesday, August 09, 2016:
How do I configure a switch so Cisco Phones will "pass voice traffic"
Why on a compass search the column User name (user that is logged on) is not being shown, or not populated?
What is BTU Requirements for C5-Series?
How to I see the usage of disk space for archives for Extreme Control Center?
Securestack PoE capable switches show a large value under "Power (w)"
Can I use Application Policy rules on my access points?
Is the Securestack able to Monitor Humidity?
NetSight Upgrade to 7.0.3.12 failing with libXtst.so.6: cannot open shared object file
What could cause TCP Re-transmission?
Have UPM log outputs changed?
Connect/Fusion menu will not appear for user created account

Wednesday, August 10, 2016:
SecureStack error "MMU" and "Parity" messages periodically seen in a Serial management session
S-Series OSPF Adjacency Not Remaining Full
Users failing to 802.1x authenticate against radius
Is CDPv2 compatible with CDPv1 and from what software version CDPv2 is supported in EXOS?
BPDU Restrict Port has received a bpdu and will be shutdown
Multicast bonjour filter rules not working in 3.11
Is MACSec 802.1AE feature supported in EXOS?
Why is MPLS signaling protocol LDP Flapping?
S-Series Reset with "Fuji CLKS MAIN"
7100 with CPU, FAN and POWER LEDs off
RTMGR process crash during constant route transitions

Thursday, August 11, 2016:
After uninstalling the Cloud Connector xmod, ZTP+ and ZTP (original version) do not work
V2110 fails to upgrade to 10.11.01 with error "This kernel requires an x86-64 CPU, but only detected an i686 CPU."
S-Series Blade Reset - Accompanying "Failed to write to ASIC" Message
VPN connection drops in 10.11.01 with a Bridged@EWC topology and AP3935
Diagnostics module for 8900 series I/O modules is not installed
How to install an xmod file in EXOS
ExtremeCloud switch has a yellow exclamation mark for its status
How to display the MAC Address Table in a 0800-Series switch
Wireless client browser reports "internal error"
OneView doesn't show connection between switch and AP
How to add a license in Extreme Control Center
NAC Agent Install shows as having a corrupt signature

Friday, August 12, 2016:
How to copy NetSight license key when needed for 7x upgrade
LLDP-MED configuration for 800-series switch
Error message Switch, Code 5: Incorrect air flow direction detected in slot 1. Ensure all fantray models are AIR OUT only.
Connected device fails to receive ARP responses
Wireless client isn't redirected to an external captive portal when using redirect at AP

Saturday, August 13, 2016:
none
Photo of Thomas, Ken

Thomas, Ken, Alum

  • 4,368 Points 4k badge 2x thumb

Posted 2 years ago

  • 0
  • 1

Be the first to post a reply!