2017-04-24: New GTAC Knowledge Articles April 16 - 22, 2017

  • 0
  • 1
  • Article
  • Updated 1 year ago
Here are the new articles that were published April 16 - April 22, 2017 in GTAC Knowledge:

Sunday, April 16, 2017:
S-Series card reset with message "Magmalite detected fatal condition"

Monday, April 17, 2017:
The status LED on I/O module got stuck in BDX8 platforms
BGP routes remain in routing table even after the BGP peer they are learned from is down
Cannot disable Ip Forwarding on a Routed Interface.
S-Series - CVE-2003-0682
VX9000 not adopting any AP

Tuesday, April 18, 2017:
Routed Wireless Topology is not routing client traffic to the internet
What do the color dots on End System icons represent
Long distance between WDS/Mesh AP's causes a retransmission even after the receiving AP acknowledged the frame
How many clients will a client port support on an AP3912i
How to Move a Config to an EOS Switch From a Switch with a Different number of Slots
S series card failed without message on console
Using 802.1x authentication with NAC, expired windows passwords cannot be reset
UPM together with policy and identity-management is slow and inconsistent
How does the Controlled Upgrade 'Save for later' feature work?
Time based bandwidth management
Cannot access EXOS via SOAP/XML from URI http://IP/xmlService
Switch reboots with default configuration after ZTP
How to enable distributed end-system cache ?
Changing the setting of dot1q tag include/exclude when VPLS is enabled affects the service vlan FDB learning on the PE devices

Wednesday, April 19, 2017:
Device Name in OneView displays the Nickname instead of the System Name
AP's drop when connected to specific switch - AP Poll Timeouts seen in Logs, firmware 9.21.15
Issues with older model Chromebooks on the 2.4ghz running 10.21.01 getting increasingly sluggish over time.
Why is PIM process Memory slowly draining?
How to apply WING license key to controller via CLI
identiFi controller doesn't send the Called-Station-Id in the format 00-01-02-03-04-05:SSID
What is the default format for the Called-Station-Id attribute in radius
Defining AP-Name within CLI Prompt
Extreme Portal Issues using IE Version 11

Thursday, April 20, 2017:
Wireless error when trying to upgrade AP: invalid file: wrong ap_type 0000000c
What is The Availability of Technical Support in Spanish/Portuguese Through the GTAC?
Cannot add or remove entries from the NTP restrict list in EXOS 22.2
Failed SNMP authentication when # symbol is used in SNMP authentication or privacy password
Why aren't remote APs upgrading and pulling the configuration after being adopted by the controller?
ExtremeWireless: How to Generate Tech_support File from CLI
WiNG license installation in Controller GUI/CLI
port 16 of x620 does not link up with 5m DAC cable
SNAP (0x00000000) is invalid. Correct value is (0x000000BB)
Failed to download image - Error: File COUGAR is not for ONIE_X86 when trying to upgrade a Summit x870

Friday, April 21, 2017:
AP6511/AP6521/AP6532/AP621/AP650 Unable to Access GUI
How to configure LACP Output Algorithm as Round Robin
AP6522 Went into SIMBA mode
Cannot start trace with Wireshark
Packet loss when "mirror to" port is down
When a firmware is pushed to the AP is it then possible to reboot the AP by resetting a switch?
Does S-K-7100-Series Support Service Access Control List (SACL)?
How many AP profiles can be created on VX9000?
Can an AP device upgrade with staggered reboot be canceled?
NAC Captive Portal is slow to load
AP Status Light On Child AP IN WDS Is Amber.
Use cablediag.py to test a Base-T copper ethernet cable for distance and twisted pair connections.
What is the OID value for a failed power supply?
Switch Chip has detected excessive number of CRC errors
Pluggable Transceivers: System[x]Pluggable module in tg.x.y indicated TX Fault.
How to Return Faulty RMA equipment back to Extreme Networks

Saturday, April 22, 2017:
none
Photo of Thomas, Ken

Thomas, Ken, Alum

  • 4,368 Points 4k badge 2x thumb

Posted 1 year ago

  • 0
  • 1

Be the first to post a reply!