2017-06-26: New GTAC Knowledge Articles June 18-24, 2017

  • 0
  • 1
  • Article
  • Updated 12 months ago
Here are the new articles that were published June 18 - June 24, 2017 in GTAC Knowledge:

Sunday, June 18, 2017:
How to perform load testing on NAC?

Monday, June 19, 2017:
Where is command reference guide for 200 series switch?
Can the WING AP7532 external antenna posts be connected to the ML-2452-PNL3M3-1 antenna in any order
How to create an Association ACL using Wing Web UI
How do you test the disk media on a older AirDefense appliance?
How do I delete an EAPS Ring
Why can't I remove the static route from the controllers config?
How do I view log files in CLI for WiNG devices?
Why does client see "system is misconfigured" webpage from EAC captive portal?
S-Series MACAuth Reauthentication has some latency
Can't create VMware snapshots after upgrading NAC/Purview/NetSight to Version 8
Netsight background servlet does not start in commbination with "Desktop Central" - ManageEngine suite.

Tuesday, June 20, 2017:
How do I report service contract related issues or discrepancies to Extreme Networks
Where are the File Transfer Settings Configured in Extreme Management Center?
Can versions of NetSight earlier than those available on the Extreme Networks Download Site be Obtained?
Administrator Roles under Management Policy Defined
How to track and communicate the status of a RMA case in the support portal
AP7522 AP7532 AP6562 WiNG 5.8.6 Questions in regards potential controller use
Connection to the AP via console port or Web UI fails
S-Series BGP prefix-list route-map filtering does not appear to be working or taking effect
How to use the 200-Series Built-in Voice VLAN
How to Configure VLAN on EOS Switches
SSH does not work after failover executed in summmit stack
Java client does not launch application after upgrading Extreme Management Center (Netsight) to version 8.02.42
Analytics upgrade from 7.1.2 to 8.0.2 fails
Traffic not being switched in ports belonging to the same VLAN
i2cenviron diagnostics fail on x870

Wednesday, June 21, 2017:
Cannot use Interface Physical IP or VRRP VIP as static route next-hop on EOS Router
APs in ExtremeCloud are showing Radio 1 with Channel (n/a) and Power listed a (0)
Repeated Reboot of K10 Fabric Blade with "Fuji EDF FIFO" Error
How to configure NTLM authentication on EAC appliance
How to add EAC appliance into EMC
B5 Switch added to Stack, and now Access Points not linking or getting Power
Cannot install 802.1X certificate on AP38xx or AP39xx
Does Netsight support XNV?
How is tagging of mirrored traffic handled in EXOS?
Upgrade to 8.0.2.42 fails

Thursday, June 22, 2017:
In EXOS python scripting,the argument sent to the command Exsh.clicmd is getting replicated 24 time.
Why do I get the error "Unable to set the 'Participation' value in the device." when changing VLAN Port Configuration in the 200-Series?
How to troubleshoot mac flapping issue
How to save your configuration on a 200-Series switch
200 Series Switch - Configuring POE for Wireless Access Points
Why is my TECHSUPPORT file bad?
How to restart Netsight / Extreme Management Center services on linux or Windows Server Platforms
Roaming with mobility enabled from V9 to V10 does not work
HAL is not responding error when try to reboot stack-topology on mixed stack of EXOS switches.

Friday, June 23, 2017:
WiNG wireless clients are experiencing latency in download speeds
PTPv1 packets are dropped when gPTP is enabled on a port
How to Remove a Firewall Service from XSR Firewall Configuration
AirDefense ADSP Appliance Can 2nd NIC Port be configured for Different Network
Schedule reboot of all AP by models with minimal downtime.
How to enable client-to-client communication Wing Express
How to restore AirDefense ADSP configuration backup file via console command line
7100 - Switch stops passing traffic reliably - Parity error seen in logs
ExtremeCloud Save option is not available after configuring a redirect URL for Captive Portal.
Device name in list different than device name in tree
How To: EXOS PTP Boundary and Ordinary Clock Configuration
How to collect Tech Support information from the 200 Series
How to disable CLI paging in the 200 Series
3805 antenna stuck in scanning when set a single DFS channel with a custom plan
Switch ports showing bcm_custom_extr_eee_config_set(16700): eee set enable error, port=9, unit=0, enable=0, rv=-16 log gmessages

Saturday, June 24, 2017:
What does the log " DHCP Client with chaddr on VLAN declined IP address " mean?
Photo of Thomas, Ken

Thomas, Ken, Alum

  • 4,368 Points 4k badge 2x thumb

Posted 12 months ago

  • 0
  • 1

Be the first to post a reply!