2017-12-04: New GTAC Knowledge Articles November 26 to December 02, 2017

  • 0
  • 2
  • Article
  • Updated 6 months ago
Here are the new articles that were published November 26 - December 02, 2017 in GTAC Knowledge:

Sunday, November 26, 2017:
none

Monday, November 27, 2017:
unable to configure anything new
How To Troubleshoot ExtremeCloud
Frequent Link flap observed on 1m passive copper cable when connected to Intel NIC card
What is the highest IP (Ingress Protection Marking)for WING Access Points?
Which ExtremeWireless AP's integrate with AirDefense 9.5?
Clients connected but not getting IP address on a L2TPv3 deployed domain/vlan

Tuesday, November 28, 2017:
Extreme Management Center: How to assign firmware to switches within Extreme Management Center
Extreme Management Center: Repeated syslog entries causing the /var/log/syslog file to grow quickly
How to flood service multicast in a hardware instead of lifting to the CPU?
javax.ejb.NoSuchEJBException: JBAS014300: Could not find EJB with id error in Ridgeline Log
Can Weak Arcfour Cipher Suite and CBC Mode Cipher Encryption and the MD5 Algorithm Used forSSH be Disabled on the Securestack

Wednesday, November 29, 2017:
How to configure default route in ISW?
Wireless clients not getting IP addresses from DHCP server when AP has both LAN ports connected to LAN
NAC - Regex "^" Caret Symbol Does Not Work In NAC LDAP Usergroup
How to perform a coredump a threaddump on a NAC or EAC
S-Series Constantly Rebooting with "Mother Board handle was NULL!" error
Why supplicant fails to authenticate using EAP-MSCHAPv2 on WiNG?
What console speed should be set when connecting an EXOS switch to the management console
Extreme Management fails upgrade to 8.0.5.18
Shoretel Phones Refuse to Boot on Policy Enabled Switch

Thursday, November 30, 2017:
Unable to disable AP radios from AP config page, still seeing AP BSSIDs in the air
In summit stack, non-master node gets rebooted whenever SNTP update happens.

Friday, December 01, 2017:
How to obtain the WiNG 5 AP Discovery tool with reset feature?
Hal Process is at 20% with default configuration on EXOS 22.3
How to perform a reset to factory default on AP7602?
Extreme Management Center 8 cannot add vlans to ports when a LAG exists on EXOS

Saturday, December 02, 2017:
Unable to configure some ip-security features after removing and adding port from vlan
Maps "Edit Serial Number" for access points search window is unusable
What doesn't the NetSight checksum match the portal posted checksum?
Firmware is out of date error log message
Photo of Thomas, Ken

Thomas, Ken, Alum

  • 4,368 Points 4k badge 2x thumb

Posted 6 months ago

  • 0
  • 2

Be the first to post a reply!