3825i stuck in channel selection on 10.31

  • 0
  • 1
  • Problem
  • Updated 1 year ago
  • Solved
We have has a number of 3825i APs get stuck in "channel selection" that is not released until the AP is rebooted.  According to the knowledge base this issue was to fixed in 10.21.  We are on version 10.31 and the problem is happening now, it didn't when we were on 10.21.
Also is there a way to set up an alert in NetSight to tell us when a radio is turned off due to this condition?
Photo of Chris Taylor

Chris Taylor

  • 796 Points 500 badge 2x thumb

Posted 1 year ago

  • 0
  • 1
Photo of faste

faste

  • 190 Points 100 badge 2x thumb
Turn of .11k or radar or update to 10.31.02
Photo of Scott Whall

Scott Whall, Employee

  • 548 Points 500 badge 2x thumb
Hi Chris - 
If you haven't tried the recently released 10.31.02, then that would be my suggestion.  There was a fix placed to improve the background scan feature.
Photo of Scott Whall

Scott Whall, Employee

  • 548 Points 500 badge 2x thumb
Also Chris - please let us know which article you found, and we can update accordingly.
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,306 Points 20k badge 2x thumb
I think you mean that one..... fixed in 10.21.02

wns0017185
Addressed AP Multi-Edit race condition for Auto-Channel Selection (ACS) configuration that could cause radio to become non-responsive

The issue was if you used multi-edit the APs stuck in scanning.
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,306 Points 20k badge 2x thumb
Photo of Scott Whall

Scott Whall, Employee

  • 548 Points 500 badge 2x thumb
Correct Ron - however, if multi-edit was not used, and this is truly the case after upgrading to 10.31.01, we will create a new KB to address this.
Photo of Craig Guilmette

Craig Guilmette, Employee

  • 2,440 Points 2k badge 2x thumb
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,194 Points 20k badge 2x thumb
The KB indicate that it's fixed in 9.21.18 - is there a release date available for that version.

Cheers,
Ron
Photo of Chris Taylor

Chris Taylor

  • 796 Points 500 badge 2x thumb
Thank you.  I will upgrade to 10.31.02 as soon as I get a chance.
Photo of David Choi

David Choi, Employee

  • 1,966 Points 1k badge 2x thumb
Would be helpful for us if you share the result of the upgrade (whether the issue would be gone or still there).
Photo of Chris Taylor

Chris Taylor

  • 796 Points 500 badge 2x thumb
I will update the thread once the upgrade is complete