3965i/e PSE Out (LAN2)

  • 0
  • 1
  • Question
  • Updated 6 months ago
  • Answered
Hi Community

Has anyone played with the POE out port on the 3965 series AP's??
I do not seem to be getting any power out on the send port to power a normal 802.11af IP Camera.
I seem to recall a year or two ago that this feature was going to be made available in a future software release.
Has this been done??
Photo of Andre Brits Kannemeyer

Andre Brits Kannemeyer

  • 5,070 Points 5k badge 2x thumb

Posted 9 months ago

  • 0
  • 1
Photo of Sam

Sam, Employee

  • 1,858 Points 1k badge 2x thumb
Hi Andre, 

What version of firmware are you using and how much power is the AP able to draw? 

As per the Installation guide: 
Power consumption < 22W (Max.) when operating as AP only
< 55W (Max.) when operating as AP and providing power to a second device

Also is the LAN 2 port enabled? 

Whats the power requirements of the camera?  

- Sam 
Photo of Andre Brits Kannemeyer

Andre Brits Kannemeyer

  • 5,070 Points 5k badge 2x thumb
Hi Sam
We are running version 10.41.x.x (Latest Firmware)

The AP is the only connected device on a POE+ (HP/Aruba 2530)

How do you enable or disable the LAN port? 
Photo of Ostrovsky, Yury

Ostrovsky, Yury, Employee

  • 3,050 Points 3k badge 2x thumb
As I know , the PoE out (on the second port) it not yet supported on 3965 AP . Currently only 3912i  AP support PoE daisy chain  . 
(Edited)
Photo of Andre Brits Kannemeyer

Andre Brits Kannemeyer

  • 5,070 Points 5k badge 2x thumb
Yes it works fine on the 3912i, but not the 3965i/e
Can we confirm this as a fact??
(Edited)
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,394 Points 20k badge 2x thumb