404 - Not Found

  • 0
  • 1
  • Problem
  • Updated 5 months ago
  • Solved
Hi there,

I'm using VX9000(5.9.1.2-006R) with 54 AP7532 adopted with it.

While checking from AP configuration on management-policy default http and https server both are enabled.

But while trying to connect from web UI I'm getting error of 404- Not Found on both https and http.
Photo of Vimalraj Veerabathiran

Vimalraj Veerabathiran

  • 418 Points 250 badge 2x thumb
  • Indifferent

Posted 5 months ago

  • 0
  • 1
Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 4,292 Points 4k badge 2x thumb
Thanks for the update.
How to check from AP side it is loaded with LEAN image or full image .?
Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 4,292 Points 4k badge 2x thumb
The controller by default uses the lean image to upgrade the APs during adoption. 
Photo of Daniel Mejia

Daniel Mejia, Employee

  • 1,056 Points 1k badge 2x thumb
Hi Vimalraj,

As Rob stated, Adopted APs are provisioned with a lean image upgrade when adopted and managed by a controller. Lean images do not provide GUI access since controller management is assumed.
Photo of Christopher Frazee

Christopher Frazee, Employee

  • 1,782 Points 1k badge 2x thumb
There is no method on the controller to determine if the AP images are LEAN or not. WiNG 5 wireless controller starting using LEAN images for APs starting v5.8. 
Photo of Bin

Bin, Employee

  • 5,350 Points 5k badge 2x thumb
Thanks Bin.