cancel
Showing results for 
Search instead for 
Did you mean: 

4511 Captive Portal

4511 Captive Portal

Eric_Voight
New Contributor
Anyone have experience or documentation for setting up a captive portal with the 4511's? I have never done it and wanted to get some documentation.
7 REPLIES 7

Eric_Voight
New Contributor
I have read the documentation and it seems pretty straightforward. There are a couple of issues though.... The system is on 5.4 firmware so, no more updates that I am aware of. I can't seem to find any documentation on the external radius setup and since this is fairly old software, I would assume an older radius server would be best (server 2008). Also, I can't set the vlan hosting interface on the captive portal policy. This is for a guest network and the guest vlan is tagged on the uplink port, do I need an untagged interface for this to work? Any help would be appreciated.

EV

Eric_Voight
New Contributor
Hello again,

This issue got swept under the rug for awhile, but I have been forced to circle back to it. I was wondering if anyone is still monitoring/responding.

Eric Voight

PARTHIBAN_CHINN
Contributor
Fortgot to tell you AP4511 doesnt have console.
So you have to login by connecting to the ethernet port.
Default ip address would be 169.254.x.x [last two octets of mac address convert to decimal].

Eric_Voight
New Contributor
Thanks to all! I will report back once I have the config completed.

GTM-P2G8KFN