7100 HAU issue

  • 0
  • 1
  • Question
  • Updated 4 years ago
I'have try an HAU upgrade from release 08.21.03.0001 to 08.22.03.0006.
This is a 2 slot VSB (bonding is ok) .When i type the command:
set boot system TOR-82203-0006 high-availability
I have this error message:
Error: More than one reset group is required to perform a HAU
But when i look for high avaibility boot info, everything seems ok:

sho boot high-availability
There is currently no High Availability Upgrade running or pending.

Status:            disabled
Default Mode:      always
Inter Group Delay: 15
Previous Image:
Target Image:
Start Time:        Unknown
Finish Time:       Unknown
Duration:          Unknown

                               Slots
-----------------------+------------------------+
Groups                 | 1  2  3  4  5  6  7  8 |
-----------------------+------------------------+
  1                    | X  .  .  .  .  .  .  . |
  2                    | .  X  .  .  .  .  .  . |
  3                    | .  .  X  .  .  .  .  . |
  4                    | .  .  .  X  .  .  .  . |
  5                    | .  .  .  .  X  .  .  . |
  6                    | .  .  .  .  .  X  .  . |
  7                    | .  .  .  .  .  .  X  . |
--More-- <space> next page, <cr> one line, <q> quit
  8                    | .  .  .  .  .  .  .  X |
-----------------------+------------------------+
Status                 | 1  2  3  4  5  6  7  8 |
-----------------------+------------------------+
 Currently Present     | X  X  .  .  .  .  .  . |
 Currently Operational | X  X  .  .  .  .  .  . |
-----------------------+------------------------+

Warning: More than one reset group is required to perform a HAU.

I'm just surprised by last phrase.The slot 1 is in group 1, slot 2 in group 2...

The HAU key is ok:

Version:       08.21.03.0001Size:          13754070 (bytes)
HAU Key:       7865eaa158e33077c38921d35877ee78744fd212 (active image)
Location:      slot1, slot2


Version:       08.22.03.0006Size:          13974582 (bytes)
HAU Key:       7865eaa158e33077c38921d35877ee78744fd212 (HAU compatible)
Location:      slot1, slot2

Any idea ?I don't see what doing more.
Thanks
Photo of stephane prigent

stephane prigent

  • 90 Points 75 badge 2x thumb

Posted 4 years ago

  • 0
  • 1
Photo of Paul Poyant

Paul Poyant, Employee

  • 3,536 Points 3k badge 2x thumb
This is a 8.21 issue addressed as of the 8.22.02.0012 firmware release.

VSB Problems Corrected in 8.22.02.0012:
"A 'high-availability' upgrade will fail on a two-slot 7100 bonded system where slot 1 is one of the two slots. Only a 'standard' upgrade can be processed."

With this product, currently the only HAU upgrade I would expect to work would be 8.22.02.0012 to 8.22.03.0006 - with the possibilities expanding upon additional firmware releases over time.
Photo of stephane prigent

stephane prigent

  • 90 Points 75 badge 2x thumb
Hi Paul
Thanks for quick reply.If i understand well, it will not be possible to make an HAU upgrade from release 8.21 ? i have to make a standart upgrade to any 8.22.x .
Photo of Paul Poyant

Paul Poyant, Employee

  • 3,536 Points 3k badge 2x thumb
Yes, that is my understanding. Both the From and To versions must have the HAU correction.
Photo of stephane prigent

stephane prigent

  • 90 Points 75 badge 2x thumb
Ok Paul.That's my understanding too...We 'll plan a standart upgrade.The problem is when to plan that.
We have the 7100 with HAU fonctionnality to avoid this (servers and uplinks are connected on the 7100 cluster) .Thanks again for answering.