802.1x Authentication Problem

  • 0
  • 1
  • Problem
  • Updated 2 years ago
  • Solved
  • (Edited)
Hi,I have Enterasys B5 Switch. My switch configures 802.1x authentication as Extreme Networks video(https://www.youtube.com/watch?v=V8lMAMqLYmk)
I connect my computer on switch port. My computer has an access to network without authentication. UPlink port is on the ge.1.24.
What is the mistake here?

Enterasys B5G124-24

Find the configuration file here
Photo of eminsesen


  • 120 Points 100 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Adilson Gal

Adilson Gal, Employee

  • 1,408 Points 1k badge 2x thumb
Remove the command lines "set eapol auth-mode forced-auth ge.x.x" and "multiauth port mode force-auth" from the access-ports and leave it only on the uplink port. Change "auth-mode" to "auth-reqd and try again. 
Photo of Paulo Silva

Paulo Silva

  • 480 Points 250 badge 2x thumb

Enable radius "set radius enable".

My configuration is and working:

set dot1x enableset eapol enable
set eapol auth-mode forced-auth ge.1.48 <uplink>

set policy maptable response both

set vlanauthorization enable

set radius enableset radius server 1 <server> 1812 <shared_secret> realm network-access

I hope success.