802.1X re-auth timer

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Hi,

my customer likes to set a timer of 1 hour after every client need to re-auth via 802.1X.

I've set the  session timer in the WLAN service to 60 but from the log I'd see that this result in a de-auth and the client starts a new auth and I loose one ping during this process.
Is there a other method so the re-auth is done in the background without loosing any data.

Is there a option to set a certain role in the case the controller can't reach the RADIUS.

Thanks,
Ron
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,114 Points 50k badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,616 Points 20k badge 2x thumb
I use the session-timeout value in NPS, works fine. I see maybe 1 ping drop if any. I just tested with a two-minute value.  
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,616 Points 20k badge 2x thumb