A4 f/w Newly-added Stack Unit's MGBIC Ports can Lose Link

  • 0
  • 1
  • Article
  • Updated 4 years ago
  • (Edited)
Article ID: 15065 

A4-Series; firmware through, through 

Added a powered-up stack unit, with MGBICs installed and ethernet-linked in its SFP slots, to a running stack or standalone unit by interconnecting their stack cables (after issuing the 'set switch stack-port stack' command to activate the stack ports).
SFP slots are numbered 51 and 52 on a 48-port switch, 27 and 28 on a 24-port switch, and 19 and 20 on a 16-port switch. 

The ethernet-linked MGBIC/SFP ports of the newly inserted member unit lose link.
Link loss is indicated via the port status LED (off), the CLI ("Oper Status Down" in a 'show port status'), and the lack of function (no longer passing traffic). 

Upgrade to 6.61 firmware or higher.
Or, optionally upgrade to firmware or higher. 

Pre-upgrade workaround:
To resolve occurrence: Power-cycle the newly stacked member unit.
To prevent occurrence: Form the stack before ethernet-linking the new member's MGBIC port(s). Though stacking a new unit while powered up will not harm it, standard procedure (7086) calls for the new unit to be powered down while connecting its stack cables.
Photo of FAQ User

FAQ User, Official Rep

  • 13,590 Points 10k badge 2x thumb

Posted 4 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.