Access Point Firmware

  • 0
  • 1
  • Question
  • Updated 11 months ago
  • Answered
Hey guys, I think I know the answer but need confirmation
we have 2 wireless controllers. One is a failover to the other. I upgraded Controller 1 from V9 to V10 and upgraded the AP's.
Controller 2 is still on the old V9 code. The upgraded AP's no longer see controller 2 as a backup tunnel. Is it because of the firmware difference?
Photo of David

David

  • 282 Points 250 badge 2x thumb

Posted 11 months ago

  • 0
  • 1
Photo of Scott Van Artsdalen

Scott Van Artsdalen

  • 344 Points 250 badge 2x thumb
As I understand it you are correct.
Photo of David

David

  • 282 Points 250 badge 2x thumb
Awesome, I upgraded the 2nd controller today and noticed backup tunnel from controller 1 AP's were re-established to controller 2. Thanks!
Photo of Bin

Bin, Employee

  • 5,370 Points 5k badge 2x thumb
Hello David,

Kindly reference you our recommend procedures for upgrading Two Controllers in Availability Mode.

http://documentation.extremenetworks.com/wireless/v10_41/mg/Wireless/Maintenance_Guide/t_upgrading_t...


Best regards
Bin