Access point's ip's different in netsight

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
HI, I have an AP with static ip address 10.1.5.2 but in netsight I see the same AP with a different ip address 10.1.5.15. (same mac address and name of the AP) The question is: how can I do to have the same information in both wireless controller and netsight?
Photo of juan romero

juan romero

  • 400 Points 250 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Rajesh Chaubey

Rajesh Chaubey

  • 72 Points
Hi Juan, 

Is it possible to share the static ip configuration of access point from WLC web-gui. 

Thanks
(Edited)
Photo of Mike Thomas

Mike Thomas, Employee - GTAC - NMS

  • 7,498 Points 5k badge 2x thumb
Screen shots of what you are looking at would provide better guidance for your problem. If it is a public IP then use a tool to gray out part of the IP address.
Photo of juan romero

juan romero

  • 400 Points 250 badge 2x thumb

Thank you, these are the sreen shots for INAH_AP_PISO_1-1 WLC and NETSIGHT




Photo of Daniel Flouret

Daniel Flouret, Employee

  • 7,470 Points 5k badge 2x thumb
Juan,

In your screenshots of the WLC the AP is configured to use DHCP and not the IP address configured there. That's why it shows 172.16.101.15 instead of 172.16.101.106...

If you want the AP to use the configured value, select Static Values instead of Use DHCP in the WLC screen.

Saludos, Daniel
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,044 Points 20k badge 2x thumb
If the AP is set to DHCP and the AP is connected to the controller the greyed out static IP Address field will show the IP that was discovered by DHCP.
So in case the AP has a up&running CAPWAP then this IP should be equal to the one that is presented in Netsight.

@Juan - could you point me to the Netsight view, mine looks different so I wonder whether I'm in another window.
What license is installed ... base or advanced
Could you post a screenshot of the AP view in OneView/Extreme Control Center - I'd like to see whether the AP is green/active in the view.
Photo of juan romero

juan romero

  • 400 Points 250 badge 2x thumb
The license is basic. Here is the main menu of one view, I can not see the option you mention.
Photo of juan romero

juan romero

  • 400 Points 250 badge 2x thumb

So sorry, I misunderstood the parameter "Ip Address Assignement" I thought it was the way AP assigns IPs to the devices connected to it. :s

Thank you very much for your help.