access-list zone

  • 0
  • 2
  • Question
  • Updated 11 months ago
  • Answered
I have a question 
I have a switch  black diamond 8800. This switch has the next configuration.

configure access-list zone SYSTEM application Netlogin application-priority 3
configure access-list zone SECURITY application GenericXml application-priority 2

How can I  to see the ACLs zone? How work these ACL?
Photo of David


  • 120 Points 100 badge 2x thumb

Posted 4 years ago

  • 0
  • 2
Photo of Paul Russo

Paul Russo, Alum

  • 9,694 Points 5k badge 2x thumb
Official Response
Good Morning David
To view the ACL you can use the command show access-list with the Zone option

"show access-list interface"
"show access-list {rule rule {start} } [ any | port port | vlan vlan_name ] {zone"
"zone_name { appl-name appl_name {priority number }}} {ingress | egress} {detail}"

This is documented in the EXOS_Command_reference_guide

A write up on Access-list zones can be found in the EXOS_Concepts_Guide

Both guides can be accessed here