ACL Block IPADDRESS ERRO

  • 0
  • 1
  • Question
  • Updated 4 years ago
  • Answered
Create Date: Nov 14 2013 7:23PM

* X450a-24t.4 # create access-list block-ip source-address 10.1.7.38/32;deny;
Error:  Attribute "source-address" does not have a valid ipv4 or ipv6 address

* X450a-24t.4 # create access-list block-ip source-address 10.1.7.38;deny;
Error:  Attribute "source-address" does not have a valid ipv4 or ipv6 address

(from tfernandes)
Photo of EtherNation User

EtherNation User, Official Rep

  • 20,340 Points 20k badge 2x thumb

Posted 4 years ago

  • 0
  • 1
Photo of EtherNation User

EtherNation User, Official Rep

  • 20,340 Points 20k badge 2x thumb
Create Date: Nov 21 2013 7:45PM

HI,

concept guide says:

create access-list icmp-echo “protocol icmp;icmp-type echo-request” “deny”
Notice that the conditions parameter is a quoted string that corresponds to the match conditions in the if { ... } portion of the ACL policy file entry.


--
Jarek

(from Jaroslaw_Kasjaniuk)

This conversation is no longer open for comments or replies.