adj 0.0.0.0: # L3 hash table entries already 0

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
<Warn:HAL.IPv4Adj.Warning> adj 0.0.0.0: # L3 hash table entries already 0.

the above log keeps on repeating several times, what could be the issue.....
Photo of Saiprasad Rao Rapolu

Posted 3 years ago

  • 0
  • 1
Photo of Patrick Voss

Patrick Voss, Alum

  • 11,594 Points 10k badge 2x thumb
Hi Saiprasad,

This is a cosmetic warning that should not cause any network related issues. Here is an article that might explain it a little better:

https://gtacknowledge.extremenetworks.com/articles/Solution/Backup-node-of-a-SummitStack-logs-warning-adj-0-0-0-0-L3-hash-table-entries-already-0

I don't know what kind of hardware and whether or not this is a stack or a chassis but this should explain it better. I would recommend upgrading to the recommended version of code according to the article below:

https://gtacknowledge.extremenetworks.com/articles/Q_A/What-Is-The-Recommended-Release-of-EXOS-For-My-Platform

Let me know if you have any questions.
We are running on 15.4.1.3 all all X440 switches, is it fine  or do they still require  an upgrade.....
Photo of Patrick Voss

Patrick Voss, Alum

  • 11,594 Points 10k badge 2x thumb
The article specifies 15.4.2 or higher. The recommended software will probably be 15.5 something. I would recommend upgrading to remove the log message.
Photo of Patrick Voss

Patrick Voss, Alum

  • 11,594 Points 10k badge 2x thumb
Please keep in mind that the message is cosmetic so you can leave it and there should not be any network related issues. The message can also be removed from the logs through configuration.
Hi,

I've got the same behavior at the x440, but we are running on 15.6.3.1 patch 1-5
(Edited)