cancel
Showing results for 
Search instead for 
Did you mean: 

Airmagnet Pattern Files for AP3805i

Airmagnet Pattern Files for AP3805i

Peter_Kulmbrein
New Contributor II
Hi,

did anyone already create the radiation pattern for the AP3805i Access-Points in Fluke Airmagnet?

I did and it seems to be not really working as my 5GHz Radio has a lot of more coverage
than the 2.4 GHz Radio

Any ideas on that?

regards
Peter
2 REPLIES 2

Peter_Kulmbrein
New Contributor II
Hi Jason, Already fixed that myself we had to adjust some parameters in the Airmagnet Settings - nevertheless pattern files would be great as other vendors patterns are delivered with Airmagnet for free and you save much time when you dont have to create them manually Peter

Jason1
Extreme Employee
Hi Peter,

I do not have a radiation pattern created in Fluke Airmagnet, but this is the data sheet for the WS-AP3805i and has radiation patterns for both radios. (I'm assuming you likely have already seen this but did not see a reply to your post)

http://www.extremenetworks.com/product/ap3805/

If there is a big discrepancy in the signal you're seeing, perhaps it is due to country or channel/config settings. If needed, we could open a case to investigate for you.

Thanks,
Jason
GTM-P2G8KFN