cancel
Showing results for 
Search instead for 
Did you mean: 

ALL NEW AP 3915i not recieving an ip address from the dhcp server after first being 'tested'in another network

ALL NEW AP 3915i not recieving an ip address from the dhcp server after first being 'tested'in another network

Sacha_Brys
Contributor
AP 3915i did not recieve an ip address from the dhcp server after being tested in another network to see if the AP was delivered well.
The AP had an ip address, being disconnected and conncted to another network with dhcp server in the same network, the AP did not recieve any ip address. After reset, it works. Is this something about caching on the AP?
8 REPLIES 8

Umut_Aydin
Extreme Employee
Hi Sacha,
after getting the IP you can change the AP config from dhcp to static ip?
Regards
Umut Aydin

StephanH
Valued Contributor III
In the controller GUI go to AP select your AP press button "Configure" go to "Static configuration", change "IP Address Assignment form DHCP to Static Values.
Regards Stephan

thx, how can I change this config then?

StephanH
Valued Contributor III
Check DHCP server logs if there are any requests from the APs.
Check if the network is untagged or not and if the AP is configured corresponding.
Regards Stephan
GTM-P2G8KFN