Any hint how to configure Cisco WCCP-Feature within K-Series

  • 1
  • Idea
  • Updated 5 years ago
  • Not Planned
Dear Community,

i recieved a request i would like to answer with a enterasys K6, the only point i found is the request of beeing capable of doing WCCP redirect do communicate to an ironport.

Is this doable with K6?

Thanks,

_ToM
Photo of Tom Egger

Tom Egger

  • 82 Points 75 badge 2x thumb

Posted 5 years ago

  • 1
Photo of Tyler Marcotte

Tyler Marcotte, Official Rep

  • 2,740 Points 2k badge 2x thumb
Hi Tom,

I'm not super familiar with Cisco's WCCP, but I think that the TWCB feature is similar. Here's a link to the feature guide if it helps.

https://extranet.enterasys.com/downloads/Pages/dms.ashx?download=823da961-baa5-49d9-9546-89e456a64c9...

Let me know if that helps. If needed I can try to ping a few others to get some more info.

-Tyler
Photo of Tom Egger

Tom Egger

  • 82 Points 75 badge 2x thumb
Hi Tyler,

TWCB is fine, but unfortunately a S-Series-Feture. SSA has some "issues" with 10G-Density, S-140 is more expensive than a Cat4500E. Maybe I ́l try with some stacked Summits:

entry redirect {if {protocol tcp/udp;destination-port 80;} then {redirect x.x.x.x/y;}}


_ToM 
Photo of Tamera Rousseau-Vesta

Tamera Rousseau-Vesta, Extreme Alumna

  • 2,760 Points 2k badge 2x thumb
Hi Tom, I would suggest that if this is a feature you would like to see in the k-series, please feel free to suggest this as a product "idea" in the community and we can get this into product management's hands.