cancel
Showing results for 
Search instead for 
Did you mean: 

AP 3825 and MLAG Topology

AP 3825 and MLAG Topology

Alex17
New Contributor II
Hi everyone!

Is it possible to perform an MLAG connection between two Summit Switches and 3825i APs?
Our intention is to provide POE and LAG functionality simultaneously to the AP.

.

8d1cbadfb96d424fa9eb007b2cec238e_RackMultipart20160614-100739-1vkcmkz-mlag_inline.jpg



Thanks in advance.

Regards,
Alex.

6 REPLIES 6

William_Aguilar
Extreme Employee
As far as PoE redundancy is concerned, the 3825 supports redundant PoE power but the AP will reboot if it loses power on the primary port and will come back up on the secondary port. Alternative it can support transparent power failover with an external power supply. For the sake of completeness the 3935 does support hitless PoE failover.

Thanks,

Will

Umut_Aydin
Extreme Employee
If both connection ends up on different switches ...yes for sure. If the ports ends on the same switch it's depend on the switch type. See the kb. regards Umut

Alex17
New Contributor II
Hi everyone!
So using MLAG we will be able to provide POE redundancy and LAG functionality simultaneously, right?

Regards,
Alex.

Paul_Russo
Extreme Employee
Hey Alex

MLAG is the function of the switches so any device that can do a LAG connection can be connected to XOS switches running MLAG.

P
GTM-P2G8KFN