AP Registration Process

  • 0
  • 1
  • Question
  • Updated 1 week ago
  • Answered
Hello Community,

can anyone provide me a successfull AP Registration Process over the CLI on an AP?

If possible, also I need the steps in the Wireshark Trace to verify where is the problem exactly.

I can ́t find anything about this in the Hub and on the GTAC Knowledge.
I this a secret or why can I found nothing?

Many thanks in advance.

Greetings.

Mario
Photo of MN

MN

  • 220 Points 100 badge 2x thumb

Posted 2 weeks ago

  • 0
  • 1
Photo of Martineau, John

Martineau, John, Employee

  • 230 Points 100 badge 2x thumb
Photo of MN

MN

  • 220 Points 100 badge 2x thumb
Hi, 
thanks for the response.

All articles are known but I don ́t mean this steps.

What steps must the AP run through to join the Controller successfully?
I would verify this in the AP Logs or with the Wireshark Tool on the Controller.

BR,

Mario
Photo of Brian Anderson

Brian Anderson

  • 378 Points 250 badge 2x thumb
In the V10 Wireless User guide, page 106 in the Discovery and Registration Overview section, gives a great visual of the discovery process.  One of the troubleshooting tools I use is to ssh into the AP (or console as last resort) and type in tail -f /tmp/log/ap.log  and you will see the log file in real time, and give clues on why it can't find the controller.  
Photo of MN

MN

  • 220 Points 100 badge 2x thumb
Hello Brian,

thanks for reply.

I need one successfully registration process over the CLI from the AP for Troubleshooting purposes.

I think Extreme should also have a guide for these steps, but I found nothing in the internet.

For comparsion Cisco has this guide for Customers.

When I open a Case the guys are also familar with this steps and verify this on the AP or in the Wireshark trace what ́s going on.

BR,

Mario
Photo of Bin

Bin, Employee

  • 4,794 Points 4k badge 2x thumb
Hi Mario,

Identifi does not have CLI debug commands like Cisco. 

For troubleshooting purposes, you could mirror traffic on switch port which connects AP. 


Thanks 
Photo of Umut Aydin

Umut Aydin, Escalation Support Engineer

  • 1,790 Points 1k badge 2x thumb
Hi Mario,

I don't think that we have any documnetation of the connecting process that it showing on that level.
But youcan  test it in the lab and look to the logs of the AP in order to see what is happening.

SSH to the AP if you connect the AP first time to the Controller or set the AP to factory default in order see all steps.

login: admin
password: new2day
# tail -f /tmp/logs/ap.log

you should see the steps what the AP tries during connection setup.

Regarding the AP trace you can use the remote capturing feature of the AP in order trace the AP ethernet port. Search for remote capture in the KB for this.


Regards

Umut