cancel
Showing results for 
Search instead for 
Did you mean: 

AP2605 factory reset

AP2605 factory reset

Pawel_Maczka
New Contributor
I forgot a password to my access point AP2605, I'v tried to push reset buton for few seconds but with no effect, What is the correct procedure fo factory reset ?
5 REPLIES 5

Pawel_Maczka
New Contributor
Big thanks e~=2.718 works !

Ronald_Dvorak
Honored Contributor
log in with username admin and password new2day (or try e~=2.718)
and then do a "set factory"
That should do the trick

Pawel_Maczka
New Contributor
It still tryin to connect to "AC_manager 192.168.168.2", witch we do not have anymore.

Pawel_Maczka
New Contributor
When I connect through console or telnet, AP keeps asking me for a login and password. When I press the reset button AP restarts and shows:

set_log_level:L40:set LOG_LEVEL to LOG_INFO.
ruMgmtGetBackupTunnel: No backup tunnel found
apCfgOpModeSet:L5097:SET REBOOT:unit:0,opMode:0
apCfgRadioChannelSet - Wlan0 - 5300 MHz is not part of country code US, or not p
ossible with this hardware
apCfgRadioChannelSet - Wlan1 - set value: 2437, AutoChanSelect: 1, channel: 2437
Key Table (Static) now [16]
Key Table (Static) now [16]
apCfgHostNameSetDefault: AP2605-0500010103050267
ar5212FillCapabilityInfo - WARNING - Restricting HW mode capabilities for wlan0
by removing B/G mode
ar5212FillCapabilityInfo - WARNING - Restricting HW mode capabilities for wlan1
by removing A mode
apCfgGatewayAddrUpdate - enabling ReAuthenticateFlag
wlanDisconnectClients: cat VNS_CAT_ALL
ALARM : 98 sec in cycle 11: AccessPoint Rebooting: Reset and Restore to DEFAU
LTS
L|00:01:38.866|806bcf50|ru_discov.c:426|ru_discov_check_timeout|# delta_s 90
wlan0 Disable interrupts 1024
Reset the HW
status = 0
wlan1 Disable interrupts 8192
Reset the HW
status = 0
Rebooting AP...
Waiting for cfg file to finish writing...done. Checksum: f6b4
apNolWrite - No Radar Info for wlan0, not initialized
apNolWrite - No Radar Info for wlan1, not initialized

ar531x rev 0x00005742 firmware startup...
SDRAM TEST...PASSED
Before Init AE531x DMA Engine

Atheros AR5312 default version 3.0.0.43A
Chantry Networks BootROM Software Version: 2.2.0

0
auto-booting...

Attaching to TFFS... done.
Loading /fl/bp200.img...1790960
Starting at 0x804c46e0...

/fl/ - Volume is OK
ru_image_signature_read: Image signature not set.
confDataExtract():"confData.bin" AP2605 length 1652 07.41.01.0192 is up to date

wlanChannSetConfData: /fl/confData.bin Ver 30 len 1652
wlanChannSetConfData: 6.1 conformance set data p 0x80ede4c0
set_log_level:L40:set LOG_LEVEL to LOG_INFO.
ruMgmtGetBackupTunnel: No backup tunnel found
apCfgCountryCodeSet:L4788:SET REBOOT:countrycode:840
apCfgRadioChannelSet - Wlan0 - set value: 5300, AutoChanSelect: 0, channel: 5300
apCfgRadioChannelSet - Wlan1 - set value: 2437, AutoChanSelect: 0, channel: 2437
apCfgDhcpcModeSet - enabling ReAuthenticateFlag
Key Table (Static) now [16]
Key Table (Static) now [16]
apCfgHostNameSetDefault: AP2605-0500010103050267
Pre-parsing Configuration File "/fl/apcfg".
Configuration file checksum: f6b4 is good
Reading Configuration File "/fl/apcfg".
apCfgRadioChannelSet - Wlan0 - set value: 5180, AutoChanSelect: 0, channel: 5180
Cfg AP2605-0500010103050267, New AP2605-0500010103050267, size 25
Configuration file checksum: f6b4 is good
ru_readSharedConfig: Shared config sensor signature invalid, 0x33333333
L|00:00:02.183|80fbfdf0|usrEndLib.c:96|usrEndLibInit|# Add interfaces B
wds notify eth: Can not send data through message queue, errno = d0003
L|00:00:04.149|80fbfdf0|datasocket.c:180|aeDataPathAttach|# Attaching tunnel pro
tocol to ae0
clusters: 1152 free: 896 usage: 256
print_log_level:L50:Current LOG_LEVEL is LOG_INFO.
L|00:00:04.149|80fbfdf0|m2Task.c:170|m2WdgInit|# Initialize timer
L|00:00:04.149|80fbfdf0|m2Task.c:139|m2Dot1xCBInit|# Initialize
ar5212FillCapabilityInfo - WARNING - Restricting HW mode capabilities for wlan0
by removing B/G mode
ar5212AttachRateTables - attching rate tables
ar5212FillCapabilityInfo - WARNING - Restricting HW mode capabilities for wlanne
tEvent: Starting tNetEvent...
0 by removing B/G mode
wlanInitChannelList: wlanInitChannelList -- 8 channels
apInit - Created Rate Set for radio: 0
Rate Set for Radio-0 OpBss-0: 6000(b) 9000 12000(b) 18000 24000(b) 36000 48000 5
4000
apVlanReset - Initializing all Vns's for wlan: 0
ar5212FillCapabilityInfo - WARNING - Restricting HW mode capabilities for wlan1
by removing A mode
ar5212AttachRateTables - attching rate tables
ar5212FillCapabilityInfo - WARNING - Restricting HW mode capabilities for wlan0
by removing B/G mode
ar5212FillCapabilityInfo - WARNING - Restricting HW mode capabilities for wlan1
by removing A mode
wlanInitChannelList: wlanInitChannelList -- 11 channels
apInit - Created Rate Set for radio: 1
Rate Set for Radio-1 OpBss-0: 1000(b) 2000(b) 5500(b) 11000(b) 6000 9000
apVlanReset - Initializing all Vns's for wlan: 1
Attaching interface lo0...done

Adding 11959 symbols for standalone.
ru_image_personality_check: AP startup role -1

AP SNMP Agent Initialization Started!!!

LLDP TASK STARTED==============================

AP SNMP Agent Initialization Done!!!
SUPP1X: EAP INFO Initialized EAP
SUPP1X: EAP INFO Created EAP Instance
SUPP1X: EAP INFO Initialized EAP1X
SUPP1X: MSS MAJOR supp1x new state disconnected/failure
SUPP1X: MSS MAJOR supp1x new state init
L|00:00:05.283|80fbfdf0|m2Task.c:199|m2AddDot1xCallBack|# Adding CB
apCservInit - Initializing Connection Services
dot1xTask - Dot1x task started
dot1xTask - radio: 0, resetting vlans: TLV_DICT out of date, updating...
0 1 2 3 4 5 6 7
dot1xTask - radio: 1, resetting vlans: 0 1 2 3 4 5 6 7
Serial No.: '0500010103050267'
Software version: '07.41.01.0192.M.00'
L|00:00:05.583|806dea00|wassp_common.c:67|open_wasspsock|# Open socket for wassp
_port=13910
bpVlanStateCheck - FAILD - No VNS-es enabled
bpVlanStateCheck - FAILD - No VNS-es enabled
L|00:00:06.283|80fbfdf0|siapp.c:284|siappInit_leg|# Our MAC addr is 00:1f:45:7e:
14:8d
Ready
Cserv Task Started
ru_mgmt start waiting for dot1x authentication to proceed
L|00:00:06.816|80732f40|ru_led.c:370|ru_led_handler|# No change, mode -214410780
8
ru_mgmt finish waiting for dot1x authentication to proceed
ru_discov started pid 1 pthread_self -2140418224
ru_discov: reRegister 0, state 0x80fbfe90
Cannot open /dev/urandom, using rand()
DHCP sync semaphore created, dhcpc_semId 0x80fbe0c0
L|00:00:08.816|806bcf50|ru_discov.c:426|ru_discov_check_timeout|# delta_s 0
STEP<0> (1/5) @ 0:00.000: Setup AP ethernet interface,
do dhcp static 0
The Host Name for DHCP Discovery is: AP2605-0500010103050267
Awaiting dhcpBind ... 30,29,28, Done.
IPaddr: 10.5.5.22
apCfgIpAddrSet - enabling ReAuthenticateFlag
IP address changed. Removing file acinfo.conf.
apCfgIpMaskSet - enabling ReAuthenticateFlag
DNS 1: 10.8.8.9
DNS 2: 10.8.8.3
Domain: 'arpwaw.local'.
apCfgGatewayAddrUpdate - enabling ReAuthenticateFlag
Gateway: 10.1.1.1
STEP<1> (1/1) @ 0:04.050: Read saved AC info conf file,
L|00:00:12.866|806bcf50|cmn_siapp.c:122|cmn_siapp_joinmc|# Joined MCast group 22
4.0.1.178
STEP<3> (1/1) @ 0:04.050: Check for static AC IP addresses,
STEP<4> (1/1) @ 0:04.050: Start discovery threads,
SLP thread started
DNS thread started
ru_discov_main_slp: threadId 0x806b7f10, pid 1
SLPU: Finding AC managers for service='siemens'
dhcp_discov_option: start DHCP INFORM option 0
Awaiting dhcpcInformGet... ru_discov_main_dns: threadId 0x806b55e0, pid 1
dhcp_discov_option: start DHCP INFORM option 1
3, Done.
SLPU: Finding RU managers for service='siemens'
dhcp_discov_option: start DHCP INFORM option 0
Awaiting dhcpcInformGet... 3, Done.
ru_discov_vendor_class_decode: total_length: 5, Type:-36, Data Length:3
DNS 1: 10.8.8.9
DNS 2: 10.8.8.3
Domain: 'arpwaw.local'.
Configured hostname is blank. Using default of 'Controller'.
Using DHCP provided DomainSuffix of 'arpwaw.local'.
Requesting "Controller.arpwaw.local" from 10.8.8.9
Awaiting dhcpcInformGet... Requesting "Controller.arpwaw.local" from 10.8.8.3
3, Done.
SLPM: Finding AC managers for service='siemens'
Add node 0x80fbc9f0, IP 192.168.168.2
ru_start_discov_threads: thread_SLP 1, thread_DNS 1
STEP<5> (1/1) @ 0:05.050: Connect to AC_RU_manager,
Attempting connection 1 to AC_manager 192.168.168.2
SLPM: Finding RU managers for service='siemens'
L|00:00:18.866|806bcf50|ru_discov.c:426|ru_discov_check_timeout|# delta_s 10
Attempting connection 2 to AC_manager 192.168.168.2

AP2605 login:

GTM-P2G8KFN