cancel
Showing results for 
Search instead for 
Did you mean: 

AP3805i, AP3825i and AP3610i Radiation patterns.

AP3805i, AP3825i and AP3610i Radiation patterns.

Rahman_Duran1
New Contributor III
Hi,

I know there is "External Antenna Site Preparation and Installation" document on extranet which covers all external antenna radiation patterns and installation notes. But I can't seem to find any document about internal antenna models.

So does these models radiate like spheres or like donut shape like external omni antennas? What is the best method to install them? Ceilings or brick wall mount? most of our 3610 and 3825 models are mounted to walls becouse it was easy to mount but I wonder if we could get better coverage if we mount them to ceilings.

Thanks.
5 REPLIES 5

Doug
Extreme Employee
Take a look at the product datasheets for the access points. The signal pattern is listed.

http://www.extremenetworks.com/product/ap3805

Also reference the following Tech Note about the 3610 wall/ceiling mounting:

https://extremenetworks.box.com/s/pq4zo7tk4i72ywvuur9q3ef1mw6gbp6y

Doug Hyde
Director, Technical Support / Extreme Networks

Doug
Extreme Employee
Yes, I will email that to you...
Doug Hyde
Director, Technical Support / Extreme Networks

Laura
New Contributor III
Are there any data sheets available for Enterasys 3605 Access Point Radiation Diagrams? I only saw version 3700 and up.

Doug
Extreme Employee
See also... https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-can-I-find-Access-Point-Radiation-Diagr...

Doug Hyde
Director, Technical Support / Extreme Networks
GTM-P2G8KFN